Abstract:Combining phase-change materials (PCM) into building envelopes can improve indoor environmental comfort and reduce energy consumption. To adapt to seasonal changes (e.g., hot summer and cold winter), a novel type of hybrid PCM-containing wallboard (including three different PCMs) was fabricated. The hybrid PCM wallboard has a wide phase-change temperature range and can work under different climates for indoor thermal comfort and energy saving. Reduce-scale test cells, two hybrid PCM wallboard integrated test boxes (including Mode 1 PCM wallboard and Mode 2 PCM wallboard) and another equipped with gypsum wallboards, were compared to study the thermal performance of the PCM contained wallboard in both passive and active systems. The results indicate that the hybrid PCM system can narrow indoor air temperature fluctuations and maintain indoor thermal comfort at any time of the entire year. Mode 2 PCM wallboards were found to be more suitable for regulating the indoor thermal environment, as they exhibited more heat release to the indoors during the daytime and less heat loss at nighttime during winter. Under stimulations of different temperature fluctuations, three different layers of the PCMs worked to respond to the temperature fluctuations. Two indices (I and E) were put forward to evaluate the thermal performance of the PCM wallboards. The I index showed that Mode 1 PCM wallboard is suitable for reducing fluctuations of indoor temperature in winter and transition season scenarios. According to the E index, throughout one year, Mode 2 PCM wallboard has higher utilization efficiency than that of Mode 1. Finally, a comparative test was performed with the active system to evaluate the energy saving potential of the two hybrid PCM wallboards. The results show that energy consumption in the hybrid PCM wallboard box is nearly 30% less than that of gypsum wallboard.

Effects of the PCM layer position on the comprehensive performance of a built-middle PV-Trombe wall system for building application in the heating season

Effects of the position and melting point of the PCM layer on the comprehensive thermal performance of a Trombe wall under mixed dry climate

Numerical Investigations on Performance of Phase Change Material Trombe Wall in Building

Investigation on heating performance of an integrated phase change material Trombe wall based on state space method

Numerical Study on Thermal Performance of PCM Trombe Wall

Experimental study of breathable and heterogeneous phase change material (B&H-PCM) wall for all-season thermal performance enhancement

Dynamic integration of phase change material in walls for enhancing building thermal performance—A novel self-adaptive method for moving PCM layer

Effect of key parameters on the transient thermal performance of a building envelope with Trombe wall containing phase change material

Experimental Thermal Performance of Wallboard with Hybrid Microencapsulated Phase Change Materials for Building Application

Influence of wall thermal performance on the contribution efficiency of the Phase-Change Material (PCM) layer

Study on the thermal performance of a new double layer PCM trombe wall with multiple phase change points

The Trombe Wall Equipped with PCMs for the Enhancement of the Indoor Thermal Quality

Thermal Performance Analysis of Lightweight Phase Change Envelopes

Numerical Thermal Characterization and Performance Metrics of Building Envelopes Containing Phase Change Materials for Energy-Efficient Buildings

Parametric and Optimization Analyses of a Dynamic Trombe Wall Incorporating PCM to Save Heating Energy under Cold Climate Zones

Enhancing Thermal Performance of Buildings Through Macro-Encapsulated PCM Integration in Wall and Roof

Coupling Optimization Study of Key Influencing Factors on PCM Trombe Wall for Year Thermal Management

Performance study of a phase change material Trombe wall system in summer in hot and humid area of China

Thermoeconomic analysis of a wall incorporating phase change material in a rural residence located in northeast China

Numerical study on thermal comfort and energy-saving potential of a prefabricated temporary house integrated with composite phase change materials

Thermal performance and economy of PCM foamed cement walls for buildings in different climate zones