Abstract:It has been confirmed that the fcc MC-type carbides such as VC and NbC have plate-like morphology and are mutually soluble when precipitated in tempering steel with martensite microstructure. Over-tempering makes the plate-like carbide change to spherical shape because of Ostwald coarsening. As coarsening is strongly linked to the diffusion rate of the carbide-forming elements, it is easy to understand that inhomogeneous structure may be formed when more kinds of elements were added, such as V, Nb and Mo. Besides, non-carbide-forming elements such as Si and Al tend to diffuse toward matrix. The morphology and lattice structure of carbide change simultaneously companying with the compositional redistribution of alloy elements. The detail compositional and nano-structural informations of the carbide can be obtained by 3DAP and HRTEM. In this paper, 3DAP and HRTEM were applied to characterize the composition, morphology and nanostructure of the carbide precipitated during 650 degrees C tempering of as-quenched Nb-V microalloyed steel. The results indicated that the martensite lath morphology was replaced by defect-free polygonal ferrite due to the recovery and recrystallization of the as-quenched microstructure. Simultaneously, the carbide-forming elements Mo and V diffused from smaller carbides to larger ones, resulting in the co-existence of carbides with different sizes and compositions. With the diffusion and redistribution of alloy elements, the prior-formed plate-like carbides grew along the radial direction, and a kind of transition carbide (P-outer) which is semi-coherent with ferrite matrix (M-bcc) was consequently formed. 3DAP constructional atom map demonstrated that Si and Al are rejected from the alloy carbide, whereas Mn and V were inhomogeneously distributed. That is, the coarsening carbide has a core-shell complex nanostructure, the core contains V, Mn, Mo and Nb, and the external shell contains Mo and Nb.

Interphase and fibrous precipitation in a thermomechanically processed V–Nb–Mo microalloyed steel

Three-dimensional atom probe microscopy study of interphase precipitation and nanoclusters in thermomechanically treated titanium–molybdenum steels

The formation mechanism of complex carbides in Nb-V microalloyed steel

Evolution from clusters to precipitates in niobium-micro-alloyed ferritic steel: A combined in situ scanning transmission electron microscopy and atomistic study

Microstructure Evolution In A Low Carbon Nb-Ti Microalloyed Steel

Contribution of Interphase Precipitation on Yield Strength in Thermomechanically Simulated Ti–Nb and Ti–Nb–Mo Microalloyed Steels

A new orientation relationship observed between MC and ferrite in TiMo microalloyed steel produced by ultra-fast cooling

Microstructure Evolution and Phase Transformations in Ti-22Al-25Nb Alloys Tailored by Super-Transus Solution Treatment

Effect of Mo on Nano‐Precipitation Behavior and Microscopic Mechanical Characteristics of Ferrite

Microstructural Evolution in a 0.09% Niobium Low Carbon Steel during Controlled Hot Deformation

Study on Carbonitride in Nb-V-N Micro-Alloyed Steel

MICROSTRUCTURE, MECHANICAL PROPERTIES AND INTERPHASE PRECIPITATION BEHAVIORS IN V-Ti MICROALLOYED STEEL

Combination of TEM and 3D Atom Probe Study of Microstructure and Alloy Carbide in a Nb-V Micro-Alloyed Steel Tempered at 650 °C

Carbide Precipitation during Processing of Two Low-Alloyed Martensitic Tool Steels with 0.11 and 0.17 V/Mo Ratios Studied by Neutron Scattering, Electron Microscopy and Atom Probe

3D ATOM PROBE CHARACTERIZATION OF CARBIDES PRECIPITATED IN THE Nb-V MICROALLOYED STEEL

3D atom probe characterization of temporal evolution of precipitates in aging Nb-V micro-alloyed steel

Characteristics of Microstructural Evolution During Deformation-Enhanced Ferrite Transformation in Nb-microalloyed HSLA Steel

Influence of tempering time on precipitates in Nb-V micro-alloyed steel

3D ATOM PROBE CHARACTERAZATION OF ALLOY CARBIDES IN TEMPERING MARTENITE III. Coarsening

Microstructure, Texture, and Formability of Nb+Ti Stabilized High Purity Ferritic Stainless Steel

Effect of Nb on inclusions and phase transformation in simulated high heat input coarse-grain HAZ of Nb/Ti low carbon microalloyed steel