Abstract:Silicon Carbide (SiC) MOSFETs have gained significant attention in power electronics for their superior characteristics. Despite advances in 1.2kV SiC MOSFET generations, a comprehensive comparative analysis of different device types remains limited. This study examines the short-circuit (SC) behavior of 1.2kV SiC MOSFETs across multiple vendors and generations, including planar and trench structures. Key metrics such as Short Circuit Withstand Time (SCWT), SC energy, SC peak power, SC energy density, and SC current density were evaluated at DC bus voltages of 400V, 600V, and 800V. Our findings reveal that third-generation (3G) devices exhibit inferior SC performance due to smaller die areas that impede heat dissipation, with 800V survival times as low as 2.25 μs for GeneSiC-3G. In contrast, trench-based designs showed improved resilience. Infineon-1G, with an active area 44.3% smaller than Littelfuse-1G and 45% smaller than CREE-2G, achieved comparable SCWT (4.5 μs vs. 4.5 μs for Littelfuse and 4 μs for CREE-2G) while demonstrating superior thermal management, with a SC energy density of 0.096 J/mm² and current density of 41.74 A/mm² at 800V. Similarly, another trench device, Rohm-3G, outperformed planar 3G devices, with a SCWT of 3.5 μs and peak power of 110 kW at 800V. Post-SC failure mechanisms were systematically analyzed using optical microscopy, Lock-In Thermal Emission Microscopy (LITEM), and Focused Ion Beam (FIB), revealing gate leakage paths and damage in the active regions and two-finger area. These findings offer significant insights into the trade-offs between on-state performance and SC robustness, providing manufacturers and designers with crucial guidance for developing optimized SiC MOSFET designs for high-power applications.

Demonstration of Superior Static, Dynamic, and Short-Circuit Performance of 1.2 kV 4H-SiC Split-Gate Octagonal Cell MOSFETs Compared with Linear, Square, and Hexagonal Topologies

Static, Dynamic, and Short-circuit Characteristics of Split-Gate 1.2 kV 4H-SiC MOSFETs

A New Cell Topology for 4H-SiC Planar Power MOSFETs for High-Frequency Switching

A Static, Switching, Short-circuit Characteristics of 1.2 kV 4H-SiC MOSFETs: Comparison between Linear and (Bridged) Hexagonal Topology

Experimental Comparison of a New 1.2 kV 4H-SiC Split-Gate MOSFET with Conventional SiC MOSFETs in Terms of Reliability Robustness

Dynamic Performance of 6.5kV/400A SiC MOSFET Module and its Gate Driver

Fabrication and Dynamic Switching Characteristics of 6.5kv400a SiC MOSFET Module

Research of Cell Topology on Characteristics of 750V SiC MOSFETs

A SiC Asymmetric Cell Trench MOSFET with Split Gate and Integrated p+-polySi/SiC Heterojunction Freewheeling Diode

A novel 4H-SiC MOSFET for low switching loss and high-reliability applications

Theoretical Analysis and Experimental Characterization of 1.2-kV 4H-SiC Planar Split-Gate MOSFET With Source Field Plate

Improved Blocking and Switching Characteristics of Split-Gate 1.2kV 4H-SiC MOSFET with a Deep P-well

Comparing the State-of-the-Art SiC MOSFETs: Test results reveal characteristics of four major manufacturers? 900-V and 1.2-kV SiC devices

A numerical comparison between MOS control and junction control high voltage devices in SiC technology

4.87 kV SiC MOSFET Using HfSiOx/SiO2 Gate Dielectrics Combined with PN Pillars

Comprehensive Short Circuit Behavior and Failure Analysis of 1.2kv SiC MOSFETs Across Multiple Vendors and Generations

A 3.3 kV 4H-SiC split gate MOSFET with a central implant region for superior trade-off between static and switching performance

Performance of a 1.2kV, 288A full-SiC MOSFET module based on low inductance packaging layout

Improved HF-FOM and SC Ruggedness of Split-Gate 4H-Sic MOSFET with P+ Buffer

A 3600 V/80 A Series--Parallel-Connected Silicon Carbide MOSFETs Module With a Single External Gate Driver