Abstract:A 4H-SiC MOSFET with p-type region injection and integrated split gate and heterojunction diode is proposed in this paper. Compared with the conventional MOSFET, the proposed structure has a lower on-resistance and switching loss. And the gate oxide layer has been well protected by the p-type region, which reduces the electric field in gate oxide layer at the off-state. The on-resistance of device can be greatly reduced by increasing the doping concentration of current spreading layer and will not cause a huge electric field in gate oxide layer. The specific on-resistance is decreased by about 27.8% and the static characteristic (BV 2 / ) of the device is improved about 37.3%. SiC material has a high third quadrant turn-on voltage due to its wide band gap characteristics. The use of heterojunction integration can take place of parasitic body diode and reduce its turn-on voltage, avoid the bipolar degradation effect, and improves the reverse recovery characteristics. To evaluate the dynamic performance, the reverse transmission capacitance ( ) and gate-drain charge ( ) of the proposed structure have been studied in this paper via numerical simulations. Based on the simulation, the HF-FOM ( ) and HF-FOM 2 ( ) of the proposed structure are decreased by about 87% and 86%, respectively. Meanwhile, the reverse turn-on voltage - nd reverse recovery characteristics are also improved, and the total energy loss decreases by about 37.3%.

A 3.3 kV 4H-SiC split gate MOSFET with a central implant region for superior trade-off between static and switching performance

A New SiC Split-gate MOSFET Structure with Protruded P-base and the Mesa above JFET for Improving HF-FOM

Improved Blocking and Switching Characteristics of Split-Gate 1.2kV 4H-SiC MOSFET with a Deep P-well

High Performance 3.3 kV SiC MOSFET Structure with Built-In MOS-Channel Diode

Static, Dynamic, and Short-circuit Characteristics of Split-Gate 1.2 kV 4H-SiC MOSFETs

A novel 4H-SiC MOSFET for low switching loss and high-reliability applications

Theoretical Analysis and Experimental Characterization of 1.2-kV 4H-SiC Planar Split-Gate MOSFET With Source Field Plate

Novel SiC Trench MOSFET with Improved Third-Quadrant Performance and Switching Speed

An improved structure of 3.3kV 4H-SiC VDMOSFETs with lower on-resistance and reverse transfer capacitance

Improved HF-FOM and SC Ruggedness of Split-Gate 4H-Sic MOSFET with P+ Buffer

Simulation Study of a Novel 4H-Sic Split Gate Double Trench MOSFET with Side Wall Gate

Low Switching Loss Split-Gate 4H-SiC MOSFET With Integrated Heterojunction Diode

Low Switching Loss and Increased Short-Circuit Capability Split-Gate SiC Trench MOSFET with p-type pillar

Experimental Comparison of a New 1.2 kV 4H-SiC Split-Gate MOSFET with Conventional SiC MOSFETs in Terms of Reliability Robustness

A New 4H-SiC Trench MOSFET With Improved Reverse Conduction, Breakdown, and Switching Characteristics

Silicon Carbide Split-Gate MOSFET with Merged Schottky Barrier Diode and Reduced Switching Loss

A SiC Asymmetric Cell Trench MOSFET with Split Gate and Integrated p+-polySi/SiC Heterojunction Freewheeling Diode

4H-SiC Double Trench MOSFET with Split Heterojunction Gate for Improving Switching Characteristics

1200 V 14 Mω SiC MOSFET with Low Specific On-Resistance of 3.3 Mω Cm2

A New SiC Trench MOSFET Structure With Protruded p-Base for Low Oxide Field and Enhanced Switching Performance

Demonstration of Superior Static, Dynamic, and Short-Circuit Performance of 1.2 kV 4H-SiC Split-Gate Octagonal Cell MOSFETs Compared with Linear, Square, and Hexagonal Topologies