Abstract:In this paper, a novel field‐oriented control for three‐phase induction motors under a single‐phase open‐circuit fault is proposed. Compared to the standard field‐oriented control, the post‐fault control method designed in this paper only uses variable current PI controllers, and it includes a different d–q transformation. The validity of the proposed control strategy has been proven by several experiments. Based on the experimental results, the standard field‐oriented control achieves high torque and speed ripples and unbalanced current amplitude after the fault, while the proposed field‐oriented control demonstrates superior transient and steady‐state performances. In addition, compared with previous studies, the proposed controller in this paper can suppress the torque ripple. Summary This paper proposes open‐phase fault detection (FD) and tolerant control strategies for wye‐connected three‐phase induction machines (WCTPIMs). The FD mechanism is based on the comparison between predicted and actual values of stator currents, and the control approach is derived from the field‐oriented control (FOC). In the proposed fault‐tolerant control (FTC) method, an asymmetrical current transformation is used for stator current components, and the conventional symmetrical voltage transformation is employed for stator voltage components. It is shown that using these transformations, a modified FOC can be employed for the faulty WCTPIM. The suggested scheme is able to control WCTPIM drives under normal and single open‐phase fault (SOPF) modes with minor adjustments. Experimental results achieved from a laboratory prototype confirm the possibility and good performance of the proposed open‐phase FD and tolerant control for the WCTPIM under different operating conditions.

A Modified FOC for FTC of Induction Motor Drives

Rotor Field Oriented Control Strategy with Harmonic Currents Closed-Loop Control for Five-Phase Induction Motor

Rotor field oriented control strategy of multiphase induction motor

Fault-Tolerant Control of Five-Phase Induction Motor under Single-Phase Open

Fault Tolerant Control of Harmonic Injected Nine-Phase Flux Switching Permanent Magnet Motor Drive System

A Generalized Open-Circuit Fault-Tolerant Control Strategy for FOC and DTC of Five-Phase Fault-Tolerant Permanent-Magnet Motor

Harmonic and Fundamental Rotor Resistance Estimation Scheme for Multiphase Induction Motor Based on Nonsinusoidal Supply Control

Rotor Faults Diagnosis in Rotor Field Oriented Controlled Induction Motors Based on Torque Current

Single open‐phase fault detection and tolerant control for wye‐connected three‐phase induction machine drives

Control Of Induction Motor Drive Based On Adrc And Inertia Estimation

Adaptive Torque Ripple Suppression Methods of Three-Phase PMSM During Single-Phase Open-Circuit Fault-Tolerant Operation

Fault-Tolerant Control of Dual-Three-Phase PMSM under Open-Phase Fault Based on Two-Individual Current Control

Fault Tolerant Control of a Multiphase Motor with Non-Sinusoidal Source under Open-Phase Conditions

An Improved Open-Phase Fault-Tolerant DTC Technique for Five-Phase Induction Motor Drive Based on Virtual Vectors Assessment

Field-Oriented Control of Five-Phase Induction Motor Fed From Space Vector Modulated Matrix Converter

Minimization of Flux and Torque Ripples of FPOEW Induction Motor with FCS-MPTC using Synthetic Voltage Vectors

Single- and Two-Phase Open-Circuit Fault Tolerant Control for Dual Three-Phase PM Motor Without Phase Shifting

Optimized Fault-Tolerant Control of Dual Three-Phase PMSM Under Open-Switch Faults

Open-Phase Fault-Tolerant Direct Torque Control Technique for Five-Phase Induction Motor Drives

A novel fault tolerant control approach based on backstepping controller for a five phase induction motor drive: Experimental investigation

Enhancing Fault-Tolerant Ability of a Nine-Phase Induction Motor Drive System Using Fuzzy Logic Current Controllers