Abstract:Introducing nanotwins into materials is one of the important strengthening methods to achieve the synergistic improvement of strength and ductility. The anisotropic mechanical behaviors of nanotwinned materials have been widely studied by experimental and computational methods. The dominant deformation mechanisms about dislocation slippages can be effectively switched among three modes, and controlled by twin spacing and the angle between twin boundaries (TBs) orientation and loading direction. Particularly, most of previous researches mainly focused on the deformation mechanisms during the plastic flow stage and researchers paid little attention on the anisotropic characteristics of TBs at the elastic stage which are also essential to manufacture the high-performance materials. Therefore, this study is aiming to systemically investigate the anisotropic effect of TBs both on the elastic and plastic stages within the single crystalline or polycrystalline by molecular dynamics (MD) simulations. It is revealed that, when the loading direction is parallel to twin planes, the introduction of TBs in single crystalline models will significantly affect the characteristics of atomic bond rotation and elongation dominated elastic deformation, which can alter the Poisson's ratio of materials, generate elastic-softening behavior and inhomogeneous elastic deformation. At the plastic flow stage, the deformation mechanism transforms from trans-twin dislocation slippage into the coexistence of Hard Mode I and threading dislocation slippage (Hard Mode II) when the loading direction changes from parallel to perpendicular direction with respect to TBs. However, both the elastic and plastic behaviors are less sensitive to TBs in vertical direction. Moreover, the dislocation segments at the conjunction of trans-twin dislocation play a momentous role in enhancing material strength. The results for polycrystalline models are consistent with that of single crystalline ones. These findings are expected to be beneficial for the development of high-performance nanostructured materials for structural and functional applications by strain engineering and defect regulation.

Orientation Dependent Twinning Behavior in a Twinning-induced Plasticity Steel Investigated by Nanoindentation

Size-Dependent Dislocation-Twin Interactions

Interactions Between Dislocations and Penta-Twins in Metallic Nanocrystals

Distribution of dislocation-twin interaction in TWIP steel under different loading modes

Transmission electron microscopy observation of a deformation twin in TWIP steel by an ex situ tensile test

Influence of crystal orientation on twinning in austenitic stainless-steel during single micro-asperity tribology and nanoindentation

Influence of load orientations with respect to twin boundaries on the deformation behaviors of high-entropy alloy nanocrystals

In-situ Neutron Diffraction Investigation on Twinning/detwinning Activities During Tension-Compression Load Reversal in a Twinning Induced Plasticity Steel

Atomistic investigation on the anisotropic elastic and plastic responses of nanotwinned metals

Atomic-scale Understanding of Twin Intersection Rotation and Ε-Martensite Transformation in a High Mn Twinning-Induced Plasticity Steel

In situ EBSD study of the twinning deformation behaviors in pure titanium

Dislocation Plasticity Reigns in a Traditional Twinning-Induced Plasticity Steel by in Situ Observation

A Study of Dynamic Plasticity in Austenite Stainless Steels with a Gradient Distribution of Nanoscale Twins

Microtwinning mechanism revealed by its orientation dependence and tension-compression asymmetry in γ′ precipitate-strengthened Ni-based superalloys

Cross-slip of extended dislocations and secondary deformation twinning in a high-Mn TWIP steel

The mechanism of twin thickening and the elastic strain state of TWIP steel nanotwins

Grain orientation statistics of grain-clusters and the propensity of multiple-twinning during grain boundary engineering

Plastic Anisotropy and Associated Deformation Mechanisms in Nanotwinned Metals

Molecular dynamics simulation of nanoindentation on nano-twinned FeCoCrNiCu high entropy alloy

Study on the Twinning/De-twining Behavior of Different Types of Twin–Twin Interaction via Experiments and Molecular Dynamics Simulation

Orientation effect on twin formation mechanisms of tungsten under uniaxial tension/compression