Abstract:Solid oxide fuel cell (SOFC), which is a generation device that converts chemical energy into electrical energy, has been regarded as a new generation device. The diffusion mechanism of metal cations and anions during the high‐temperature oxidation process of SOFC is proposed. Based on the equilibrium expression and diffusion equation, the chemo‐mechanical coupling relationship between oxide stress and thickness growth of the oxide layer is established by considering the influences of viscoplastic effect and oxide growth effect. The present theoretical result is consistent with the previous experimental results. In addition, the stress critical points corresponding to different parameters are different in initial oxidation stage. The oxide stress varies dramatically with time in the compressive stress phase, but it changes slowly in the tensile stress phase. The compressive stress that exists in the oxide layer increases with the growth coefficient (DNiO = 1000‐15 000 m−1) of the oxide layer. The oxide stresses in oxide layer and electrolyte reduce with viscoplastic coefficient of the oxide layer from JNiO = 8.97 × 10−5 Pa−1 s−1 to JNiO = 16.97 × 10−5 Pa−1 s−1 and anode‐oxide layer thicknesses from H = 30 μm to H = 660 μm, while they increase with viscoplastic coefficient of the anode from JNi = 3.81 × 10−5 Pa−1 s−1 to JNi = 12.81 × 10−5 Pa−1 s−1 and kinetic parabolic constant from kp = 2.9 × 10−15 m2s−1 to kp = 12.9 × 10−15 m2s−1 in whole oxidation stage. The oxide thickness increases with kinetic parabolic constant in the whole oxidation stage and this changing trend accords with parabolic diffusion law. The oxide thickness increases with temperatures increasing. The results obtained from this study will provide the reference to the researches of the chemo‐mechanical coupling model and performance optimization of SOFC under high‐temperature oxidation.

Study on extremely high temperature gradient at entrance of solid oxide fuel cell by preheating model

Towards Feasible Temperature Management and Thermo-Mechanical Stability of Carbon-Assisted Solid Oxide Electrolysis Cell

Solid Oxide Electrolysis Cell under Real Fluctuating Power Supply with a Focus on Thermal Stress Analysis

Chemo‐mechanical coupling model of solid oxide fuel cell under high‐temperature oxidation

Local heat generation management for temperature gradient reduction in tubular solid oxide fuel cells

Experimental investigation of temperature distribution in solid oxide fuel cells

Effect of Operation Parameters on the Thermal Characteristics in a Planar Solid Oxide Fuel Cell

Numerical Study on Electric Characteristics and Thermal Stresses of Solid Oxide Fuel Cells

An Experimental Evaluation of the Temperature Gradient in Solid Oxide Fuel Cells

Thermal Stress Analysis at the Interface of Cathode and Electrolyte in Solid Oxide Fuel Cells

Highly Thermal Integrated Heat Pipe-Solid Oxide Fuel Cell

Transient Thermomechanical Analysis of a Solid Oxide Fuel Cell Stack Based on 3D Multiphysical Field Model

Afterburner temperature safety assessment for solid oxide fuel cell system based on computational fluid dynamics

The Thermal Effects of All Porous Solid Oxide Fuel Cells

A Novel Flow Channel Design to Achieve High Temperature Homogenization in Solid Oxide Fuel Cell

Three‐dimensional Nonisothermal Modeling of Solid Oxide Fuel Cell Coupling Electrochemical Kinetics and Species Transport

Low Temperature Solid Oxide Fuel Cells with Hierarchically Porous Cathode Nano-Network

Numerical Study of Temperature Distribution in Tubular Segmented-in-series SOFC with Co-Flow and Counter-Flow Arrangements

Numerical Study On Thermal Stresses Of A Planar Solid Oxide Fuel Cell

Thermal Shock Resistance and Failure Probability Analysis on Solid Oxide Electrolyte Direct Flame Fuel Cells

EFFECT OF GRADIENT ANODE ON MASS TRANSFER PERFORMANCE FOR ANODE-SUPPORTED PLANAR SOLID OXIDE FUEL CELLS