Abstract:Conventional plate osteosynthesis of critical-sized bone defects in canine mandibles can fail to restore former functionality and stability due to adaption limits. Three-dimensional (3D) printed patient-specific implants are becoming increasingly popular as these can be customized to avoid critical structures, achieve perfect alignment to individual bone contours, and may provide better stability. Using a 3D surface model for the mandible, four plate designs were created and evaluated for their properties to stabilize a defined 30 mm critical-size bone defect. Design-1 was manually designed, and further shape optimized using Autodesk ® Fusion 360 (ADF360) and finite element analysis (FE) to generate Design-2. Design-4 was created with the generative design (GD) function from ADF360 using preplaced screw terminals and loading conditions as boundaries. A 12-hole reconstruction titanium locking plate (LP) (2.4/3.0 mm) was also tested, which was scanned, converted to a STL file and 3D printed (Design-3). Each design was 3D printed from a photopolymer resin (VPW) and a photopolymer resin in combination with a thermoplastic elastomer (VPWT) and loaded in cantilever bending using a customized servo-hydraulic mechanical testing system; n = 5 repetitions each. No material defects pre- or post-failure testing were found in the printed mandibles and screws. Plate fractures were most often observed in similar locations, depending on the design. Design-4 has 2.8–3.6 times ultimate strength compared to other plates, even though only 40% more volume was used. Maximum load capacities did not differ significantly from those of the other three designs. All plate types, except D3, were 35% stronger when made of VPW, compared to VPWT. VPWT D3 plates were only 6% stronger. Generative design is faster and easier to handle than optimizing manually designed plates using FE to create customized implants with maximum load-bearing capacity and minimum material requirements. Although guidelines for selecting appropriate outcomes and subsequent refinements to the optimized design are still needed, this may represent a straightforward approach to implementing additive manufacturing in individualized surgical care. The aim of this work is to analyze different design techniques, which can later be used for the development of implants made of biocompatible materials.

On 3D printing of dental crowns with direct metal laser sintering for canine

3D Printing Assisted Investment Casting of Dental Crowns for Recycling of DMLS Waste

On 3D printed novel stifle prosthesis for canines

On the Use of 17-4 Precipitate Hardened Stainless Steel Waste Powder for 3D Printing of Implants with Tuneable Stress Shielding Capabilities

3D Printing Surgical Implants at the Clinic: A Experimental Study on Anterior Cruciate Ligament Reconstruction

A preliminary study of the mechanical properties of 3D-printed personalized mesh titanium alloy prostheses and repair of hemi-mandibular defect in dogs

Effect of meta-structure on mechanical properties of polyvinylidene fluoride composite-based 3D printed intramedullary pins

Reproduction of human dental models using different 3D printing techniques

3D Printing of Ti-6Al-4V-Based Porous-Channel Dental Implants: Computational, Biomechanical, and Cytocompatibility Analyses

A novel root analogue dental implant using CT scan and CAD/CAM: selective laser melting technology

An Individually Designed Custom-Made Mandibular Condyle Prosthesis Using Selective Laser Melting: Finite Element Analysis

Research Progress on the Preparation Process and Material Structure of 3D-Printed Dental Implants and Their Clinical Applications

3D-printed strong hybrid materials with low shrinkage for dental restoration

Comparison of Intaglio Surface Trueness of Interim Dental Crowns Fabricated with SLA 3D Printing, DLP 3D Printing, and Milling Technologies

3D Printing of Dental Prostheses: Current and Emerging Applications

Design and manufacture of customized dental implants by using reverse engineering and selective laser melting technology

Optimization of 3D Printing Technology for Fabrication of Dental Crown Prototype Using Plastic Powder and Zirconia Materials

3D printed plates based on generative design biomechanically outperform manual digital fitting and conventional systems printed in photopolymers in bridging mandibular bone defects of critical size in dogs

Custom-made polyglycolic acid/polylactic acid scaffolds cocultured with bone marrow stroma cells of canine in vitro

Computer Aided Design and Manufacture of the Porcelain Fused to Metal Crown

3D printing, modelling and simulation for dental implant: A comprehensive review