Abstract:A systematic analytical study of the mathematical properties of the previously constructed nonlinear model for shear flow of thixotropic viscoelastic-plastic media is continued. For arbitrary six material parameters and an (increasing) material function that control the model, the basic properties of the families of stress-strain curves at constant strain rates and relaxation curves generated by the model, and the features of the evolution of the structuredness under these types of loading are analytically studied. The dependences of these curves on time, shear rate, initial strain and initial structuredness of the material, as well as on the material parameters and function of the model, are studied. Several indicators of the applicability of the model are found which are convenient to check with experimental data. It was examined what effects typical for viscoelastic-plastic media can be described by the model and what unusual effects (unusual properties) are generated by a change in structuredness in comparison with typical stress-strain curves and relaxation curves of structurally stable materials. In particular, it has been proved that stress-strain curves can be both increasing functions and can have decreasing sections resembling a "yield tooth" or damped oscillations, that all stress-strain curves (SSCs) possess horizontal asymptotes (steady flow stress), monotonically dependent on shear rate, and flow stress increases with shear rate growth, that the instantaneous shear modulus, on the contrary, depends on the initial structuredness, but does not depend on shear rate. Under certain restrictions on the material parameters, the model is also capable of providing a bilinear form of stress-strain curves, which is typical for an ideal elastoplastic model, but with strain rate sensitivity. It has been established that the family of stress-strain curves does not have to be increasing either in initial structuredness or in shear rate: in a certain range of shear rates, in which the equilibrium position is a "mature" focus and pronounced oscillations of stress-strain curves are observed, it is possible to intertwine stress-strain curves with different shear rates. It is proved that for any material parameters and functions, all stress relaxation curves decrease and have a common zero asymptote as time tends to infinity. The analysis proved the ability of the model to describe behavior of not only liquid-like viscoelastoplastic media, but also solid-like (thickening, hardening, hardened) media: creep, relaxation, recovery, a number of typical properties of experimental relaxation curves, creep and stress-strain curves, strain rate and strain hardening, flow under constant stress and so on.

Advantages and Disadvantages of the Ramberg–Osgood Law in Modeling a Stress–Strain Curve with a Section of Positive Curvature

Improved Method of Giuffre-Menegotto-Pinto Hysteretic Constitutive Model

The nonlinear stress-strain curve model as a solution of the fourth order differential equation

Modeling the Stress-Strain Curve of Elastic-Plastic Materials

A full-range stress-strain model for metallic materials depicting non-linear strain-hardening behavior

The Yield Volume Fraction approach to the description of the stress-strain curve of a nickel-base superalloy

Optimization of the Stress-Strain State of Functional Gradient Structures with Stress Raisers

A Model of Undrained Stress–Strain Curves Considering Stress Path and Strain Softening

A Heuristic Elastoplastic Damage Constitutive Modeling Method for Geomaterials: From Strength Criterion to Analytical Full-Spectrum Stress–Strain Curves

Families of Stress–Strain, Relaxation and Creep Curves Generated by a Nonlinear Model for Thixotropic Viscoelastic-Plastic Media Accounting for Structure Evolution Part 2. Relaxation and Stress-Strain Curves

Mesomechanical Aspects of the Strain-Rate Sensitivity of Armco-Iron Pulled in Tension

Two-Stage Stress-Strain Models for Light-Gauge Steels

A moment–curvature-based constitutive model for interactive simulation of visco-plastic rods

Analysis and Modeling of Stress-Strain Curves in Microalloyed Steels Based on a Dislocation Density Evolution Model

The Uniaxial Stress–Strain Relationship of Hyperelastic Material Models of Rubber Cracks in the Platens of Papermaking Machines Based on Nonlinear Strain and Stress Measurements with the Finite Element Method

Simplified method to identify full von Mises stress-strain curve of structural metals

A novel constitutive model for S30408 stainless steel considering strain memory effect: Formulation and implementation

Computational Analysis of Fracture Mechanics Model Problems Based on the Toupin–Mindlin Gradient Elasticity Theory Equations

Families of Stress-Strain, Relaxation, and Creep Curves Generated by a Nonlinear Model for Thixotropic Viscoelastic-Plastic Media Accounting for Structure Evolution Part 3. Creep Curves

Energetically stable curve fitting to hyperelastic models based on uniaxial and biaxial tensile tests

Families of Stress-Strain, Relaxation, and Creep Curves Generated by a Nonlinear Model for Thixotropic Viscoelastic-Plastic Media Accounting for Structure Evolution Part 1. The model, Its Basic Properties, Integral Curves, and Phase Portraits