Abstract:A systematic analytical study of the mathematical properties of the previously constructed nonlinear model for shear flow of thixotropic viscoelastic-plastic media is continued. For arbitrary six material parameters and an (increasing) material function that control the model, the basic properties of the families of stress-strain curves at constant strain rates and relaxation curves generated by the model, and the features of the evolution of the structuredness under these types of loading are analytically studied. The dependences of these curves on time, shear rate, initial strain and initial structuredness of the material, as well as on the material parameters and function of the model, are studied. Several indicators of the applicability of the model are found which are convenient to check with experimental data. It was examined what effects typical for viscoelastic-plastic media can be described by the model and what unusual effects (unusual properties) are generated by a change in structuredness in comparison with typical stress-strain curves and relaxation curves of structurally stable materials. In particular, it has been proved that stress-strain curves can be both increasing functions and can have decreasing sections resembling a "yield tooth" or damped oscillations, that all stress-strain curves (SSCs) possess horizontal asymptotes (steady flow stress), monotonically dependent on shear rate, and flow stress increases with shear rate growth, that the instantaneous shear modulus, on the contrary, depends on the initial structuredness, but does not depend on shear rate. Under certain restrictions on the material parameters, the model is also capable of providing a bilinear form of stress-strain curves, which is typical for an ideal elastoplastic model, but with strain rate sensitivity. It has been established that the family of stress-strain curves does not have to be increasing either in initial structuredness or in shear rate: in a certain range of shear rates, in which the equilibrium position is a "mature" focus and pronounced oscillations of stress-strain curves are observed, it is possible to intertwine stress-strain curves with different shear rates. It is proved that for any material parameters and functions, all stress relaxation curves decrease and have a common zero asymptote as time tends to infinity. The analysis proved the ability of the model to describe behavior of not only liquid-like viscoelastoplastic media, but also solid-like (thickening, hardening, hardened) media: creep, relaxation, recovery, a number of typical properties of experimental relaxation curves, creep and stress-strain curves, strain rate and strain hardening, flow under constant stress and so on.

Modeling the Stress-Strain Curve of Elastic-Plastic Materials

Stress-Strain curves for solid polymers

Theoretical Models for Stress-Strain Curves of Elastomer Materials

Families of Stress–Strain, Relaxation and Creep Curves Generated by a Nonlinear Model for Thixotropic Viscoelastic-Plastic Media Accounting for Structure Evolution Part 2. Relaxation and Stress-Strain Curves

The nonlinear stress-strain curve model as a solution of the fourth order differential equation

Experimental Methodology for Obtaining the Flow Curve of Sheet Materials in a Wide Range of Strains

Inverse Analysis of the Stress–strain Curve to Determine the Materials Models of Work Hardening and Dynamic Recovery

A full-range stress-strain model for metallic materials depicting non-linear strain-hardening behavior

A New Regression Model for the Prediction of the Stress–Strain Relations of Different Materials

Advantages and Disadvantages of the Ramberg–Osgood Law in Modeling a Stress–Strain Curve with a Section of Positive Curvature

Families of Stress-Strain, Relaxation, and Creep Curves Generated by a Nonlinear Model for Thixotropic Viscoelastic-Plastic Media Accounting for Structure Evolution Part 1. The model, Its Basic Properties, Integral Curves, and Phase Portraits

Families of Stress-Strain, Relaxation, and Creep Curves Generated by a Nonlinear Model for Thixotropic Viscoelastic-Plastic Media Accounting for Structure Evolution Part 3. Creep Curves

Analysis and Modeling of Stress-Strain Curves in Microalloyed Steels Based on a Dislocation Density Evolution Model

Representing the stress and strain energy of elastic solids with initial stress and transverse texture anisotropy

Stress–Strain Behaviors in Large Plastic Strain Ranges under Monotonic Loading

Analytical Solution for True Stress-True Strain Curve of Titanium and Ti-6Al-4V in Uniaxial Tension Considering Interaction among Microstructures

Constitutive Models for Regression of Various Experimental Stress–strain Relations

Elastic-Plastic Endochronic Constitutive Model of 0crl7ni4cu4nb Stainless Steels

A strain rate dependent thermo-elasto-plastic constitutive model for crystalline metallic materials

Some General Characteristics of the Stress-Strain Relation of Polycrystalline Metals

The Yield Volume Fraction approach to the description of the stress-strain curve of a nickel-base superalloy