Abstract:<p>Modern hybrid rockets are susceptible to the highly ablative environment in which they operate, as introducing an adequate cooling system has so far been a challenge. Ablative material has been widely adopted for use in hybrid rockets, which can only survive for the limited operation time. The use of ablative materials such as pyrolytic composite or graphite is advantageous for use in a simple system in an uncooled state. However, ablation causes severe enlarging in the nozzle throat area and a significant drop in the pressure during operation. Recently, Ultra High-Temperature Ceramics (UHTCs) have been noted as superior in terms of ablation and oxidation resistance. The most promising HfC-SiC composite ceramic has demonstrated an enhanced performance for thermal and mechanical properties. In this study, an HfC-SiC composite was embedded in the graphite casing as a nozzle insert throat to analyze the feasibility of its application in rockets. An experimental analysis of the ablation in the HfC-SiC was carried out with a 250 N scale hybrid thruster using High Test Peroxide (HTP) and High-Density Polyethylene. The hot-fire condition was set to above 30 bar for 25 s combustion, with the purpose of producing significant erosion on the nozzle materials. The graphite nozzle of the same shape was also tested under the same experimental conditions for comparison of the erosion. The hot-fire test with the HfC-SiC insert resulted in a stable rocket performance, with improvements to the chamber pressure and the thrust, whereas the combustion performance varied undesirably in the test using the graphite nozzle due to ablation. The rate of ablation in the throat was significantly reduced to 15.81 μm/s using HfC-SiC, which is 46.5% of the erosion rate found in the graphite. The adoption of the HfC-SiC composite effectively inhibited the ablation on the throat. However, substantial erosion occurred on the interfaces due to the different ablation resistances. The feasibility of adopting hafnium-based carbide on the rocket was also evaluated based on a material analysis of the surface oxidation.</p>

Ablation Experiments of High-Temperature Materials (Inconel, C–C and SiC) Using a High-Velocity Oxygen-Fuel Torch

Ablation behavior and mechanisms of Cf/(CrZrHfNbTa)C‒SiC high‐entropy composite at temperatures up to 2450°C

Ablation behavior of nose-shaped HfB2-SiC modified carbon/carbon composites exposed to oxyacetylene torch

Ablation behavior of sharp leading-edge C/C-ZrC-SiC composites using 3000 C oxyacetylene torch

Ablation Experiments of Ultra-High-Temperature Ceramic Coating on Carbon–Carbon Composite Using ICP Plasma Wind Tunnel

Microstructure Evolution and Ablation Mechanism of C/C and C/C‐SiC Composites Under a Hypersonic Flowing Propane Torch

Ablation behavior of mullite modified C/C-SiC-HfC composites under oxyacetylene torch for single and cyclic ablations with two heat fluxes

Ablation behavior and mechanisms of Cf/(Ti0.2Zr0.2Hf0.2Nb0.2Ta0.2)C–SiC high-entropy ceramic matrix composites

Ablation behavior of 3D PyC-Cf/SiHfBOC Composites under an oxyacetylene torch environment above 2000 °C

Ablation resistance of C/C-SiCo nanoporous ceramic composites with TaSi2-MoSi2-ZrB2-borosilicate glass coating

Ablation behavior and mechanisms of 3D-Cf/Ta0.8Hf0.2C-SiC composite at temperatures up to 2500 °C

Oxidation/ablation behaviors of hafnium carbide-silicon carbonitride systems at 1500 and 2500 C

Ablation mechanism of Cf/(Ti0.2Zr0.2Hf0.2Nb0.2Ta0.2)C-SiC composite during plasma ablation above 2000 °C

Ablation evolution of a new light weight silicon based thermal protection material in high temperature gas flow

Experimental And Numerical Evaluation Of The Ablation Process Of Carbon/Carbon Composites Using High Velocity Oxygen Fuel System

Long-term ablation mechanisms of the YB4-Al2O3-Si3N4 modified Cf/HfC-SiC composites at 2600 °C

Ablation mechanism of C/C–SiC and C/C–SiC–ZrC composites in hypersonic oxygen-enriched environment

Ablation behavior of thin-blade co-deposited C/Cx-SiCy composites under the influence of the complex fluid conditions of the oxyacetylene torch

Ablation Mechanism of AlSiB-C/C Composites under an Oxy-Acetylene Torch

Ablation behavior of C f /ZrC–SiC ultra–high temperature ceramic composites in oxyacetylene torch and plasma wind tunnel

Ablation characteristics of rocket nozzle using HfC-SiC refractory ceramic composite