Abstract:• The externally gapped line arrester (EGLA) performance, which incorporates the frequency grounding system, has been explored as a new approach. • The effect of port length, diameter, and grounding electrode shape on the grounding system impedance has been modelled. • An economic analysis based on the grounding system type (non‐linear or frequency) has been performed. • The findings revealed that the secondary costs, including EGLA and insulator string failure costs, are influenced by the precise modelling of the grounding system. This paper conducts the frequency‐dependent grounding system impact on externally gapped line arresters (EGLAs) operation and their placement effects on the lightning performance of a transmission line (TL). The study involves placing EGLAs at different phases of a 400‐kV double‐circuit TL with two downstream shield wires and selecting the optimal state with fewer back‐flashover incidents. The results show that using a non‐linear grounding system leads to a higher back return current from insulators or EGLAs, resulting in a higher flashover rate compared to the frequency grounding system (FGS). Installing four EGLAs in the middle and upper phases of the TL provides satisfactory lightning protection, and the flashover probability is zero and 4.2% for the FGS and the non‐linear grounding system, respectively. A sensitivity analysis including soil resistor variation, economic analysis, and grounding electrode configuration has been performed that confirms installing downstream shield wires and EGLAs is an effective and economical technique for lightning protection.

Externally gapped line arrester performance in high voltage transmission line using frequency grounding system: Absorbed energy and expected life assessment

Externally gapped line arresters placement effect on transmission line lightning performance including the frequency response of the grounding system

Development of Surge Arresters With Series Gap Against Lightning Breakage of Covered Conductors on Distribution Lines

Research on Lightning Protection of 220kv Substation with Long Cable Inlet Wire

Research on lightning intruding waves in 220 kV GIS substation

Lightning Protection of 500-kV DC Gas-Insulated Lines (GIL) With Integrated Surge Arresters

Various Benefts for Line Surge Arrester Application and Advantages of Externally Gapped Line Arresters

Application of EGM in Lightning Protection Design of Transmission Line with Ultra-high Tower and Great Span

Research of the Lightning Protection Performance for 220 Kv Double-Circuit Transmission Line

Simulated Calculation and Analysis of Lightning Performance of UHV A.C. Transmission Line

Assessment of the Effects of the Electromagnetic Pulse on the Response of Overhead Distribution Lines to Direct Lightning Strikes

LEMP and ground conductivity impact on the direct lightning performance of a medium-voltage line

Improved Electrogeometric Model of UHV Transmission Line Based on Long Gap Discharge and Its Application

Lightning Performance of the Dinghai- Ningbo East Extra-large Span Transmission Line

Lightning Performance of Quadruple-circuit Transmission Line with Dual Voltage 500/220 Kv on the Same Tower

Lightning Overvoltage Analysis of a 380-kV overhead line with a GIL

Improvement of the lightning shielding performance of overhead transmission lines by passive shield wires

Effects of Approximating Recorded Lightning Currents with CIGRE Waveforms on Computed Fast-Front Overvoltages and Critical Lightning Currents Causing Flashover to Overhead Transmission Lines

Influence of Series Gap Structures on Lightning Impulse Characteristics of 110-Kv Line Metal–Oxide Surge Arresters

Flashover pattern analysis for 275 kV double circuit transmission lines during direct lightning strikes

Estimation of the minimum shielding failure flashover current for first and subsequent lightning strokes to overhead transmission lines