Abstract:Lithium metal anode is recognized as the "Holy Grail" electrode because of its high specific capacity (3860 mAh/g) and low reduction potential (-3.04 V vs. standard hydrogen electrode), which is meaningful for batteries systems. Remarkable improvement of ionic conductivity of sulfide electrolyte exceeding 10 mS/cm at room temperature has opened up the opportunity to realized the commercialization of lithium metal anode. However, the practical implement of Li anode in solid-state batteries is hundered by the poor cycle stability and the low energy efficiency stemming from the unstable interfaces due to the ultrahigh reactivity of lithium metal. At the anode interface, the lithium dendrite growth and solid electrolytes (SE) reduction by lithium metal are serious challenges for lithium metal anode. To suppress the interfacial reactions and lithium dendrite formation at the sulfide electrolyte/Li metal anode interface, various strategies have been implemented by researchers, such as in situ formed robust SEI (solid electrolyte interface), surface modification and SE modification, etc. In this article, we focus on the artificial solid electrolyte interface (ASEI) to strengthening the Li metal and solid electrolyte interface. We fabricate the uniform LiF-rich ASEI using CF3(CF2)(3)OCH3 by heating at a temperature of 150 degrees C for 6 h. LiF layer at the interface between Li and sulfide electroyte could prevent Li dendrite growth. Compared to the Li/sulfide electrolyte interface, the Li/LiF/sulfide electrolyte interface is more stable. The symmetrical cell LiF@Li//Li6PS5Cl//LiF@Li (LiF@Li//LPSCl//LiF@Li) does not short-circuit after 40 cycles at the current density of 0.1 mAh/cm(2) with a lower polarization potential. A solid-state battery LiNbO2@LiCoO2//LPSCl//LiF@Li (LNO@LCO//LPSCl//LiF@Li) employing LiF coated Li metal as anode shows a high reversible discharge capacity of 138.4 mAh/g at 0.05 C and retains 110.9 mAh/g after 50 cycles. This interficial engineering for lithium metal and sulfide solid electrolyte provides new opportunity to commercialize the Li metal batteries.

Hierarchical Sulfide‐Rich Modification Layer on SiO/C Anode for Low‐Temperature Li‐Ion Batteries

A Dynamically Stable Sulfide Electrolyte Architecture for High-Performance All-Solid-State Lithium Metal Batteries

A Bifunctional Composite Artificial Solid Electrolyte Interphase for High Stable Solid-State Lithium Batteries

Interface Engineering Enables Wide-Temperature Li-Ion Storage in Commercial Silicon-Based Anodes

In Situ Artificial Hybrid SEI Layer Enabled High‐Performance Prelithiated SiO x Anode for Lithium‐Ion Batteries

Robust and Fast‐Ion Conducting Interphase Empowering SiO x Anode Toward High Energy Lithium–Ion Batteries

Prelithiated Surface Oxide Layer Enabled High-Performance Si Anode for Lithium Storage.

Modifying SiO @ C As High-performance Anode of Lithium-ion Batteries

Organosulfide-plasticized Solid-Electrolyte Interphase Layer Enables Stable Lithium Metal Anodes for Long-Cycle Lithium-Sulfur Batteries.

An artificial layer enables in situ generation of a homogeneous inorganic/organic composite solid electrolyte interphase for stable lithium metal batteries

Rigid and Flexible SEI Layer Formed Over a Cross‐Linked Polymer for Enhanced Ultrathin Li Metal Anode Performance

An Effective Strategy on Synthesizing a Stable SiOx‐Based Anode for High Density Lithium‐Ion Batteries

High Ion‐Conductive Interphase Enabled by Nitrate‐Ionic Liquid Additive for Low‐Temperature Lithium Metal Batteries

LiF‐Induced Stable Solid Electrolyte Interphase for a Wide Temperature SnO 2 ‐Based Anode Extensible to −50 °C

LiF‐Induced Stable Solid Electrolyte Interphase for a Wide Temperature SnO2‐Based Anode Extensible to −50 °C

Interficial Engineering of Lithium Metal Anode for Sulfide Solid State Batteries

Stable lithium anode enabled by biphasic hybrid SEI layer toward high-performance lithium metal batteries

Low-temperature and high-rate-charging lithium metal batteries enabled by an electrochemically active monolayer-regulated interface

Lithium Polysulfide-Based Electrolytes for Li Metal Anodes

A Uniform Self‐Reinforced Organic/Inorganic Hybrid SEI Chelation Strategy on Microscale Silicon Surfaces for Stable‐Cycling Anodes in Lithium‐Ion Batteries

An Al2O3 Coating Layer on Mesoporous Si Nanospheres for Stable Solid Electrolyte Interphase and High-Rate Capacity for Lithium Ion Batteries.