Abstract:Currently, the high cost and the time-consuming preparation of electrolytes of quasi-solid-state dye-sensitized solar cells (QS-DSSCs) remain the key issue for the large-scale commercial fabrication of DSSCs. In this work, we propose a quasi-solid electrolyte based on a conductive melamine formaldehyde (MF) sponge scaffold for the fabrication of QS-DSSCs, which are MXene-MF, rGO-MF and PEDOT:PSS-MF. The three-dimensional porous structure in MF can quickly adsorb and store electrolytes, which shows high wettability, high organic solvent saturated adsorption capacity, and high electrical transmission performance. Specifically, the quasi-solid electrolyte prepared by this method can shorten the preparation method to less than 0.5 s, which also significantly reduces the preparation cost of the quasi-solid electrolyte. The QS-DSSC photoelectric conversion efficiency (PCE) of the melamine formaldehyde sponge can reach up to 7.822%. As compared with other conductive materials, MXene-MF is demonstrated to effectively improve the transmission performance of photogenerated electrons in the external circuit and the counter electrode interface. Meanwhile, the QS-DSSC based on MXene-MF has high catalytic activity, exchange current density, and IPCE. Specifically, the PCE reaches 26.92% under the indoor lighting condition of 1000 lux. Additionally, the QS-DSSC based on the composite sponge quasi-solid electrolyte exhibits excellent optoelectronic properties and long-term stability up to 90% in 1000 h. Finally, these QS-DSSCs based on the conductive MF sponge will have great promising potential in renewable energy applications such as flexible batteries and intelligent buildings.

Fabrication of copper oxide-based dye-sensitized solar cell with high short-circuit current density (JSC) using flexible and binder-free porous photoelectrode

Highly-flexible, low-cost, all stainless steel mesh-based dye-sensitized solar cells

Bulky 3D Structures of Dithienopyrrol Dye with Copper(II/I) Redox Mediator Enabling Efficient Solar Cells with an Open-Circuit Voltage of 1.13 V

A Solid-State Dye-Sensitized Solar Cell Based On A Novel Ionic Liquid Gel And Zno Nanoparticles On A Flexible Polymer Substrate

Flexible Silver Grid/Pedot:Pss Hybrid Electrodes for Large Area Inverted Polymer Solar Cells

Facile fabrication of highly porous photoanode at low temperature for all-plastic dye-sensitized solar cells with quasi-solid state electrolyte

Membrane-based Electrolyte Sheets for Facile Fabrication of Flexible Dye-Sensitized Solar Cells

Conductive Mesh Based Flexible Dye-Sensitized Solar Cells

High-Efficiency Dye-Sensitized Solar Cells Based on Kesterite Cu 2 ZnSnSe 4 Inlaid on a Flexible Carbon Fabric Composite Counter Electrode

New Diketopyrrolopyrrole (dpp) Dyes for Efficient Dye-Sensitized Solar Cells

Flexible dye-sensitized solar cells assisted with lead-free perovskite halide

Low-cost Zinc-Plated Photoanode for Fabric-Type Dye-Sensitized Solar Cells

Novel design for flexible quasi-solid-state dye-sensitized solar cells based on heat-resistant glass paper

Low Temperature Fabrication of High Performance P-N Junction on the Ti Foil for Use in Large-Area Flexible Dye-Sensitized Solar Cells

Low Cost and Strongly Adsorbed Melamine Formaldehyde Sponge Electrolyte for Nontraditional Quasi-Solid Dye-Sensitized Solar Cells

7.379 % Power Conversion Efficiency of a Numerically Simulated Solid-State Dye-Sensitized Solar Cell with Copper (I) Thiocyanate as a Hole Conductor

Flexible counter electrodes with a composite carbon/metal nanowire/polymer structure for use in dye-sensitized solar cells

All-carbon Electrode-Based Fiber-Shaped Dye-Sensitized Solar Cells

Preparation of a Textile-Based Dye-Sensitized Solar Cell

Near Field Enhanced Photocurrent Generation in P-Type Dye-Sensitized Solar Cells.

Porous ZnO Nanosheet Arrays Constructed on Weaved Metal Wire for Flexible Dye-Sensitized Solar Cells.