Abstract:The liquid electrolyte causes the corresponding leakage and sealing problems in the construction of dye-sensitized solar cells (DSSCs). Currently, quasi-solid-state polymer-based electrolytes have been reported to effectively improve the leakage and volatilization of traditional liquid electrolytes in DSSCs. In this work, reduced graphene oxide (rGO) and the intercalation of MXene/rGO were utilized in the copolymer polyethylene oxide/poly(vinylidene fluoride-co-hexafluoropropylene) as a printable gel electrolyte for the preparation of quasi-solid-state DSSCs (QS-DSSCs). The effects of different contents of rGO and different ratios of MXene/rGO intercalation on the photoelectric performance of DSSCs were well studied. When the rGO content was 0.5 wt %, the power conversion efficiency (PCE) of DSSC was about 7.781%. Specifically, when the ratio of MXene/rGO was 2/1, the photovoltaic performance of DSSCs was greatly enhanced. The corresponding short current density (J sc), open-circuit voltage (V oc), fill factor, and PCE were obtained to be 15.170 mA/cm2, 0.783 V, 0.695, and 8.255%, respectively. With the intercalation structure between MXene and rGO, the conductivity of electrolytes seemed to be improved through the possible shortening of transmission and diffusion distance of electrolyte ions. The printable electrolyte could achieve an energy conversion efficiency of 29.94% under 1000 lux illumination. A long-term stability (>95%) of QS-DSSCs was also achieved with the composite of MXene/rGO over 1000 h. Finally, this ready screen-printing technology with the electrolyte of the MXene/rGO composite in the copolymer would have great potential for the large-scale manufacture of flexible DSSCs in the future.

Membrane-based Electrolyte Sheets for Facile Fabrication of Flexible Dye-Sensitized Solar Cells

Biomimetic Electrodes for Flexible Organic Solar Cells with Efficiencies over 16%

Flexible Silver Grid/Pedot:Pss Hybrid Electrodes for Large Area Inverted Polymer Solar Cells

A Solid-State Dye-Sensitized Solar Cell Based On A Novel Ionic Liquid Gel And Zno Nanoparticles On A Flexible Polymer Substrate

Highly-flexible, low-cost, all stainless steel mesh-based dye-sensitized solar cells

Stable Hydrophobic Ionic Liquid Gel Electrolyte for Stretchable Fiber-Shaped Dye-Sensitized Solar Cell

A quasi-solid-state dye-sensitized solar cell based on porous polymer electrolyte membrane

Tuning electrolyte configuration and composition for fiber-shaped dye-sensitized solar cell with poly(vinylidene fluoride-co-hexafluoropropylene) gel electrolyte

Preparationof Fabric-Like Transparent Electrodefor Flexible Perovskite Solar Cell

Flexible Platinum-Free Fiber-Shaped Dye Sensitized Solar Cell with 10.28% Efficiency

A Mechanically Robust Conducting Polymer Network Electrode for Efficient Flexible Perovskite Solar Cells

The Electrically Conductive Function Of High-Molecular Weight Poly(Ethylene Oxide) In Polymer Gel Electrolytes Used For Dye-Sensitized Solar Cells

Ti 3 C 2 MXene-Reduced Graphene Oxide Composite Polymer-Based Printable Electrolyte for Quasi-Solid-State Dye-Sensitized Solar Cells

Flexible dye-sensitized solar cells assisted with lead-free perovskite halide

Dye-Sensitized Solar Cells with Solvent-Free Ionic Liquid Electrolytes

Flexible solar-cell from zinc oxide nanocrystalline sheets self-assembled by an in-situ electrodeposition process

Low Cost and Strongly Adsorbed Melamine Formaldehyde Sponge Electrolyte for Nontraditional Quasi-Solid Dye-Sensitized Solar Cells

Synthesis of a series of novel imidazolium-containing ionic liquid copolymers for dye-sensitized solar cells

Embossed transparent electrodes assembled by bubble templates for efficient flexible perovskite solar cells

Novel design for flexible quasi-solid-state dye-sensitized solar cells based on heat-resistant glass paper

Surface Plasmon‐Assisted Transparent Conductive Electrode for Flexible Perovskite Solar Cells