Abstract:In this paper, the effect of the raw particle size and the annealing process on the compositions, microstructure, mechanical, thermal, and electrical properties of ZnO varistors was investigated using X-ray diffraction, infrared, X-ray photoelectron spectroscopy, scanning electron microscopy, electric field–current density, capacitance–voltage, mechanical, and thermal expansion measurements. Furthermore, the ZnO grain growth mechanism during the annealing process was discussed in detail. Results show that when the raw particle size equaled 90 nm and sintering was performed at 1100 °C for 2 h, the obtained ZnO-based varistors possessed excellent mechanical, thermal, and electrical properties; the E1mA, α, JL, and K values were 1015.3 V mm–1, 37.98, 2.45 μA cm–2, and 1.37, respectively, due to the highest bulk density and the finest uniform particle size distribution. When annealing occurred at 300 °C for three times, values of σf, KIC, E1mA, α, JL, and K reached 175.35 MPa, 1.96 MPa m1/2, 1180.2 V mm–1, 43.58, 2.15 μA cm–2, and 1.2, indicating improvements of approximately 14.7%, 4%, 16.2%, 14.7%, − 12.2%, and 11.11% compared with those of the non-annealed ZnO-based varistors, respectively, being due to the improved uniformity of grain size distribution and the re-distribution of donor Al3+ and Y3+ in the ZnO crystal and grain boundary. The annealing process lead to the transformation of Sb3+ to Sb5+ in the ZnO crystal, which could generate two additional coordination sites. The newly generated sites could combine with O2- in other crystals to increase the grain growth, resulting in clear grain growth on the surface, improved grain size distribution, and regular grain shape in the interior of ZnO-based varistors.

The effect of ZnO particle size on the dynamic mechanical, thermal, and dielectric properties of ZnO varistor-Epoxy composites

Dynamic mechanical, thermal, and dielectric properties of ZnO varistor-epoxy composite material

Filler Size Effect on Tuning Electrical, Mechanical, and Thermal Properties of Field Grading Composites

Influence of Y2O3 on Electrical Properties and Dielectric Characteristics in ZnO Based Varistor Ceramics

Effect of additive particle size on degradation behavior of ZnO varistors under high current surges

Influence of ZnSb2O6 Doping on Phase, Electrical and Dielectric Properties of ZnO Varistors

Influence of Dopants on Electrical Properties of ZnO-V 2 O 5 Varistors Deduced from AC Impedance and Variable-Temperature Dielectric Spectroscopy

The Degradation of Epoxy Resin-Coated ZnO Varistors at Elevated Temperatures and Ambient Humidity Conditions

Effects of raw particle size and annealing on microstructure, electrical and mechanical behaviors of ZnO-based varistors

Influence of SnO2 on ZnO–Bi2O3–Co2O3 Based Varistor Ceramics

Influence of Grain Size on Distribution of Temperature and Thermal Stress in ZnO Varistor Ceramics

Study on the Electrical Properties and the Ac Conductance Response of ZnO-Based Varistor

Study on the electrical properties and defect structures of a high voltage gradient ZnO varistor

Enhanced voltage gradient and energy absorption capability in ZnO varistor ceramics by using nano-sized ZnO powders

The Effect of ZnO Powder Particle Distribution on Performance of Multilayer Chip Varistor

Effects of the Er2O3 doping on the microstructure and electrical properties of ZnO–Bi2O3 based varistor ceramics

Microstructure and Electrical Properties of ZrO2-doped ZnO Varistor Ceramics

Preparation, Characterization and Dielectric Response of a High-Breakdown-field ZnO-based Varistor

Elaboration and electrical characterization of ZnO-based varistor ceramics in different sintering temperatures

Electrical Properties of T-ZnO_w/PTFE Composites

Effects of radius and electronegativity of donors on the microstructure and mechanical, thermal, and electrical properties of ZnO varistors