Abstract:The inverted perovskite solar cells (PSCs) are gaining increasing attention recently for their unprecedented advantages, such as better integration with tandem and flexible designs, negligible hysteresis, good operational stability, and compatibility with commercially scalable fabrication approaches. Nickel oxide (NiOx) films prepared by magnetron sputtering technology exhibit excellent scalability and reproducibility, which could well meet the requirements of the large-scale production of inverted PSCs. However, NiOx prepared by vacuum methods generally has fewer surface hydroxyl groups, deteriorating the wettability and damaging the interface contact with the perovskite. Particularly, the Ni3+ defects on the NiOx surface could lead to unfavorable redox reactions with organic cations in the perovskite under high temperatures, promoting the rapid degradation of the perovskite. Thus, surface regulation of sputtered NiOx is imperative for high-performance PSCs. Herein, 4-(trifluoromethyl) phenylcarbamate hydrochloride (TFFA) was used to regulate the surface properties of sputtered NiOx. The strongly electronegative F ions in TFFA passivated the Ni3+ defects on the NiOx surface, suppressed unfavorable interface reactions, and improved charge recombination. The polar ammonium functional group was used to adjust the surface energy of NiOx, thereby improving the wettability and optimizing the crystallization kinetics of the perovskite. As a result, the power conversion efficiency (PCE) of PSCs reached 22.76%, which was among the highest PCEs reported for sputtered NiOx-based inverted PSCs to date. Moreover, the unencapsulated target devices exhibited better stability, maintaining over 85% of the initial PCE after aging for approximately 1200 h in a N2 environment. Our achievements pointed out a practical strategy for enhancing the performance of sputtered NiOx-based inverted PSCs, which could potentially accelerate the development and application of large-area PSCs.

Magnetron sputtered Al-doped NiOx films as a hole transport layer for perovskite solar cells

High-Performance Planar Perovskite Solar Cells Using Low Temperature, Solution-Combustion-Based Nickel Oxide Hole Transporting Layer with Efficiency Exceeding 20%

Chemical Bath Deposition of NiO<sub><i>x</i></sub>-NiSO<sub>4</sub> Heterostructured Hole Transport Layer for Perovskite Solar Cells

Chemical Bath Deposition of NiOx‐NiSO4 Heterostructured Hole Transport Layer for Perovskite Solar Cells

Efficient NiOx Hole Transporting Layer Obtained by the Oxidation of Metal Nickel Film for Perovskite Solar Cells

Chemical Bath Deposition of NiO <sub> <i>x</i> </sub> ‐NiSO <sub>4</sub> Heterostructured Hole Transport Layer for Perovskite Solar Cells

High Efficiency Inverted Planar Perovskite Solar Cells with Solution-Processed NiOx Hole Contact.

Practical and Thermal Atomic Layer Deposition of NiO as Hole‐Transporting Layers for Inverted Perovskite Solar Cells

Sputtered Niox Films As Hole Transport Layers for FA-Based Perovskite Solar Cell Application

Room-Temperature-Sputtered Nanocrystalline Nickel Oxide as Hole Transport Layer for p–i–n Perovskite Solar Cells

Nickel Oxide as Efficient Hole Transport Materials for Perovskite Solar Cells

Metal organic framework derived NiO x nanoparticles for application as a hole transport layer in perovskite solar cells

Doping Free and Amorphous NiO x Film via UV Irradiation for Efficient Inverted Perovskite Solar Cells

The effects of interfacial dipole caused by annealing-free Al-doped NiOx in efficient perovskite solar cells

Magnetron-sputtered nickel oxide films as hole transport layer for planar heterojunction perovskite solar cells

Efficiency enhancement of perovskite solar cells based on Al2O3-passivated nano-nickel oxide film

Surface Property Regulation of a Magnetron-Sputtered NiOx Hole Transport Layer for High-Performance Inverted Perovskite Solar Cells

Zwitterion Dual-Modification Strategy for High-Quality NiOx and Perovskite Films for Solar Cells

NiOx Nanocrystals with Tunable Size and Energy Levels for Efficient and UV Stable Perovskite Solar Cells

Vacancy Defect Modulation in Hot-Casted NiO X Film for Efficient Inverted Planar Perovskite Solar Cells

Efficient Inverted Planar Perovskite Solar Cells Using Ultraviolet/Ozone‐Treated NiOx As the Hole Transport Layer