Abstract:During the past years, the power conversion efficiency (PCE) of perovskite solar cells (PSCs) has increased from 3.8% to 25.7%, making them the best candidate for the next-generation photovoltaic devices. Two dominant PSC architectures have evolved, a regular n-i-p structure with mesoscopic or planar heterojunction and an inverted p-i-n planar structure. Compared to the regular n-i-p PSCs, the inverted p-i-n PSCs possess the advantages of lower synthesis temperature, no hysteretic effect and good compatibility with the tandem solar cells. For p-i-n PSCs, the hole transport layer (HTL) determines the hole transport efficiency and crystallinity of perovskite, so it plays a crucial role in the stacked devices. The conventional organic HTL of PEDOT:PSS-based PSCs can achieve satisfying PCEs, but may be able to impede the commercialization of perovskite photovoltaic devices because of their high price and acidity-induced poor stability. By comparison, the inorganic P-type NiOx with wide band gap exhibits low cost, superior chemical stability and high hole mobility without corrosion to perovskite layer. Unlike the most reported spin-coated NiOx nanoparticle films, we used sputtered NiOx as HTL for application in FA-based PSCs and achieved a PCE of 20.05%. After systematically optimizing the sputtering parameters, including power, time and argon flow rate, we obtained better crystal quality, better transparency, proper energy level, and higher hole mobility of NiOx film. Reducing the interstitial vacancies and defects in NiOx films attributes to decreased nonradiative recombination losses, which mainly cause the hole accumulation near the perovskite/NiOx interface. Finally, a champion device with open-circuit voltage (Voc) of 1.09 V, current density (Jsc) of 23.4 mA/cm 2 , fill factor (FF) of 78% and PCE of 20.05% are obtained. This work has important significance for preparation of large-area perovskite solar cell modules.

Practical and Thermal Atomic Layer Deposition of NiO as Hole‐Transporting Layers for Inverted Perovskite Solar Cells

Reduced Lattice Mismatch at the Interface of Perovskite and LaNiO3 Hole Transport Layers for Highly Efficient P–i–n Perovskite Solar Cells

Room-Temperature-Sputtered Nanocrystalline Nickel Oxide as Hole Transport Layer for p–i–n Perovskite Solar Cells

Oxidized Nickel to Prepare an Inorganic Hole Transport Layer for High-Efficiency and Stability of CH3NH3PbI3 Perovskite Solar Cells

Nickel Oxide for Perovskite Photovoltaic Cells

Praseodymium Doped Nickel Oxide as Hole-Transport Layer for Efficient Planar Perovskite Solar Cells

The effects of interfacial dipole caused by annealing-free Al-doped NiOx in efficient perovskite solar cells

Sputtered Niox Films As Hole Transport Layers for FA-Based Perovskite Solar Cell Application

Functionalized Nickel Oxide As a Hole Transport Layer for Organic Solar Cells with Simultaneous Enhancement of Efficiency and Stability

Nickel Oxide as Efficient Hole Transport Materials for Perovskite Solar Cells

Pristine inorganic nickel oxide as desirable hole transporting material for efficient quasi two-dimensional perovskite solar cells

Preparation of Nickel Oxide Nanoflakes for Carrier Extraction and Transport in Perovskite Solar Cells

Potassium-Doped Nickel Oxide as the Hole Transport Layer for Efficient and Stable Inverted Perovskite Solar Cells

Nickel oxide for inverted structure perovskite solar cells

NiOx Nanocrystals with Tunable Size and Energy Levels for Efficient and UV Stable Perovskite Solar Cells

Thermally-stable and highly-efficient bi-layered NiOx-based inverted planar perovskite solar cells by employing a p-type organic semiconductor

Magnetron sputtered Al-doped NiOx films as a hole transport layer for perovskite solar cells

Doping Free and Amorphous NiO x Film via UV Irradiation for Efficient Inverted Perovskite Solar Cells

Role of annealing temperature of nickel oxide (NiOx) as hole transport layer in work function alignment with perovskite

Surface Modification of NiO Nanoparticles for Highly Stable Perovskite Solar Cells Based on All-Inorganic Charge Transfer Layers

Functionalized nickel oxide as hole transport layers for organic solar cells with simultaneous enhancement of efficiency and stability