Abstract:Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, Ahead of Print. Localised heat input, as it occurs in welding with moving heat sources, induces residual stresses and distortion in materials. The quantitative determination of residual stress evolution is difficult. Despite existing models, residual stress build-up with temperature progression is not fully understood. High-flux density X-rays from a synchrotron source allow the measurement of local strains in materials and improve the resolution of stress gradients as it permits small measurement volumes (Gibmeier et al., 2014). A laser beam welding process was used to perform linear bead-on-plate welds on bar steel samples. The X-ray diffraction system recorded the transient strain evolution. Multiple repetitions at different locations in the specimen were combined to develop a map of the strains present within the specimen. The temperature was measured locally at the surface of the sample. As the strain was determined within a measurement volume inside the sample, the temperature history over time had to be obtained as well. A numerical model was employed to determine the temperature inside the measurement volume. This model was calibrated using the transient surface temperatures and metallographic cross-sections. The result was a representation of the local strain superimposed on the temperature distribution. Analysis of this data correlation showed that a strain maximum occurs as a function of time and distance from the heat source, which is likely to coincide with the austenite-ferrite phase transformation temperature.

Stress Dependence on Relaxation of Deformation Induced by Laser Spot Heating

Simplified Laser-Speckle Strain Gauge

Residual Stress Inspection by Eu3+ Photoluminescence Piezo-Spectroscopy: an Application in Thermal Barrier Coatings

Specific Features of Stresses Relaxation and Recrystallization of Steel under Laser Heating

Dynamic Observation of Localized Strain Pulsation Generated in the Plastic Deformation Process by Electronic Speckle Pattern Interferometry

Microscopic observation of strain induced in heteroepitaxial layers with reflection type of infrared polariscope

Direct strain measurement method based on the correlation of defocused laser speckle pattern

Unraveling Residual Stress Distribution Characteristics of 6061-T6 Aluminum Alloy Induced by Laser Shock Peening

Detection of Mechanical Deformation Induced by Ultrafast Laser Irradiation upon a Metallic Cantilever

Synchrotron EDXRD strain-temperature measurement during laser welding

Non-contact Measurements of Residual Stress Distribution and Grain Size in Titanium Alloys with Laser Ultrasonic System

Residual Deformation Measurement of Laser Weldment Using the Laser Interferometry

Local Thermal Expansion in Super-Resolution Near-Field Structure

Stress waves in laser-material interaction: From atomistic understanding to nanoscale characterization

X-ray stress measurement of SiC single-crystal induced by laser ablation

Integrated Control of Thermal Residual Stress and Mechanical Properties by Adjusting Pulse-Wave Direct Energy Deposition

Characterizations of Stress and Strain Variation in Three-Dimensional Forming of Laser Micro-Manufacturing

Residual strains of laser welding specimen by high temperature resistant gratings

Speckle Interferometry to Investigate Degradation Processes of Stressed Solid Materials

Investigation of Surface Residual Stress for Medium Carbon Steel Quenched by YAG Laser with Extended Cycloidal Motion

Energy-dependent correlation between micro/nano-morphology and stress state of femtosecond laser-induced modification in fused silica