Abstract:Huge and critical structures, such as fuel storage tanks and nuclear power plants, are often built on dense sandy grounds, which may cause excessive plastic deformations under multidirectional cyclic shearing conditions caused by earthquakes. The lack of investigation of sand behavior under multidirectional loading may lead to unsafe designs, and thus significantly increase the maintenance cost for infrastructures during their long operational time, which might be longer than 100 years. This study presents a numerical investigation on the liquefaction behavior of dense sand under bidirectional cyclic simple shear using the discrete element method. The bidirectional cyclic simple shear tests with varying stress trajectories on the deviatoric stress plane, including figure-8, circular, and straight lines, were conducted. Additionally, a series of unidirectional loading tests was conducted in the simulation scheme for comparison purposes. The effect of the initial static shear on the cyclic behavior and liquefaction resistance of granular materials was examined. Four loading categories, including full reversal, partial reversal, intermediate reversal, and no reversal, were implemented in the numerical simulations. Although the presence of the initial static shear may enhance the cyclic resistance of granular samples under unidirectional loading, it mitigates the liquefaction resistance and promotes the failure of specimens under bidirectional shearing conditions. The microscopic analysis was performed to reveal the relationship between the fabric evolution and external loading, which can provide profound insights into the underlying mechanism of the cyclic behavior and liquefaction susceptibility of granular material when both the bidirectional shearing and initial static shear effects are considered.

Comparative Study on Liquefaction Behavior of Calcareous Sand and Siliceous Sand Under Simple Shear Loading

Energy-based Assessment of Cyclic Liquefaction Behavior of Clean and Silty Sand under Sustained Initial Stress Conditions

Discrete-Element Simulation of Dense Sand under Uni- and Bidirectional Cyclic Simple Shear Considering Initial Static Shear Effect

Failure Mechanisms of Sand under Asymmetrical Cyclic Loading Conditions: Experimental Observation and Constitutive Modelling

Characterizing the Liquefaction Potential and Pore Pressure Generation of Silty Sands Through the Energy-Based Approach in the Framework of Critical State Soil Mechanics

Signature of Anisotropy in Liquefiable Sand under Undrained Shear

Undrained Behavior of Sand under Cyclic Paths That Match Storm-Wave Loading Conditions

Comparison of Cyclic Liquefaction Behavior of Clean and Silty Sands Considering Static Shear Effect

Cyclic Failure Characteristics of Silty Sands with the Presence of Initial Shear Stress

Effect of Particle Shape on the Liquefaction Resistance of Calcareous Sands

A New Index for Evaluating Liquefaction Resistance of Soil under Combined Cyclic Shear Stresses

Liquefaction of Sand under Monotonic and Cyclic Shear Conditions: Impact of Drained Preloading History

Shear Band Between Steel and Carbonate Sand Under Monotonic and Cyclic Loading

Small-strain shear modulus and liquefaction resistance of calcareous sand with non-plastic fines

Effects of gradation and grain crushing on the liquefaction resistance of calcareous sand

Liquefaction resistance and small strain stiffness of silty sand: Effects of host sand gradation and fines content

Influence of Particle-Size Disparity on Cyclic Liquefaction Resistance of Silty Sands

Undrained cyclic behaviors of fiber-reinforced calcareous sand under multidirectional simple shear stress path

A New Parameter to Evaluate Liquefaction Resistance of Saturated Sand under Complex Dynamic Stress Paths

Experimental Investigation of the Liquefaction Properties and Post-Liquefaction Volumetric Strain of Calcareous Sand in Dredger Fill Site

Experimental study of the mechanical behavior of calcareous sand under repeated loading-unloading