Abstract:Huge and critical structures, such as fuel storage tanks and nuclear power plants, are often built on dense sandy grounds, which may cause excessive plastic deformations under multidirectional cyclic shearing conditions caused by earthquakes. The lack of investigation of sand behavior under multidirectional loading may lead to unsafe designs, and thus significantly increase the maintenance cost for infrastructures during their long operational time, which might be longer than 100 years. This study presents a numerical investigation on the liquefaction behavior of dense sand under bidirectional cyclic simple shear using the discrete element method. The bidirectional cyclic simple shear tests with varying stress trajectories on the deviatoric stress plane, including figure-8, circular, and straight lines, were conducted. Additionally, a series of unidirectional loading tests was conducted in the simulation scheme for comparison purposes. The effect of the initial static shear on the cyclic behavior and liquefaction resistance of granular materials was examined. Four loading categories, including full reversal, partial reversal, intermediate reversal, and no reversal, were implemented in the numerical simulations. Although the presence of the initial static shear may enhance the cyclic resistance of granular samples under unidirectional loading, it mitigates the liquefaction resistance and promotes the failure of specimens under bidirectional shearing conditions. The microscopic analysis was performed to reveal the relationship between the fabric evolution and external loading, which can provide profound insights into the underlying mechanism of the cyclic behavior and liquefaction susceptibility of granular material when both the bidirectional shearing and initial static shear effects are considered.

Influence of Particle-Size Disparity on Cyclic Liquefaction Resistance of Silty Sands

Energy-based Assessment of Cyclic Liquefaction Behavior of Clean and Silty Sand under Sustained Initial Stress Conditions

Characterizing the Liquefaction Potential and Pore Pressure Generation of Silty Sands Through the Energy-Based Approach in the Framework of Critical State Soil Mechanics

Discrete-Element Simulation of Dense Sand under Uni- and Bidirectional Cyclic Simple Shear Considering Initial Static Shear Effect

Cyclic Flow Behavior of Anisotropically Consolidated Sand with a Small Amount of Fines

Cyclic Failure Characteristics of Silty Sands with the Presence of Initial Shear Stress

Failure Mechanisms of Sand under Asymmetrical Cyclic Loading Conditions: Experimental Observation and Constitutive Modelling

Signature of Anisotropy in Liquefiable Sand under Undrained Shear

Comparison of Cyclic Liquefaction Behavior of Clean and Silty Sands Considering Static Shear Effect

Influences of fines content on cyclic resistance ratio of fines-sand-gravel mixtures

Effect of Particle Shape on the Liquefaction Resistance of Calcareous Sands

Effects Of Particle Shape On The Liquefaction Resistance Of Sands

Liquefaction resistance and small strain stiffness of silty sand: Effects of host sand gradation and fines content

A New Index for Evaluating Liquefaction Resistance of Soil under Combined Cyclic Shear Stresses

Influences of particle size distribution and fines content on the excess pore water pressure generation of sand-silt mixtures under cyclic loading

Small-strain shear modulus and liquefaction resistance of calcareous sand with non-plastic fines

Exploring Packing Density, Critical State, and Liquefaction Resistance of Sand-Fines Mixture Using DEM

A New Parameter to Evaluate Liquefaction Resistance of Saturated Sand under Complex Dynamic Stress Paths

Effect of fines on liquefaction resistance of sand

Effect of particle composition and consolidation degree on the wave-induced liquefaction of soil beds

Comparative Study on Liquefaction Behavior of Calcareous Sand and Siliceous Sand Under Simple Shear Loading