Abstract:To explore the feasibility of geogrid reinforcement as a promising countermeasure to improve the liquefaction and post-liquefaction resistance of calcareous sand, extensive undrained monotonic and multi-stage triaxial tests were performed on unreinforced and geogrid reinforced calcareous sand with different relative densities. The test results illustrate that pore pressure generation curves of unreinforced and reinforced calcareous sand gradually evolve from S-shaped to hyperbolic-shaped with the increase in relative density, cyclic stress ratio, and effective confining pressure. Following this, a pore pressure model applicable to both unreinforced and reinforced calcareous sand is proposed. The liquefaction resistance of calcareous sand increases with the increase in relative density, whereas an elevated cyclic stress ratio increases its liquefaction susceptibility. A virtually unique relationship can be observed between the liquefaction resistance normalized to the product of phase transformation strength ratio and relative density against the number of cycles for triggering liquefaction, providing an effective means of early assessing sand liquefaction resistance. Moreover, the geogrid exhibits excellent reinforcement efficiency in enhancing the liquefaction resistance of calcareous sand at relative densities of 50% and 70%. During the post-liquefaction stage, increasing relative density and geogrid reinforcement can accelerate the recovery of stiffness and strength for liquefied calcareous sand and improve the post-liquefaction strength. In general, geogrid reinforcement is considered a good alternative to densification for improving the engineering properties of calcareous sand and offers great application prospects in marine engineering construction.

Experimental Investigation of the Liquefaction Properties and Post-Liquefaction Volumetric Strain of Calcareous Sand in Dredger Fill Site

Failure Mechanisms of Sand under Asymmetrical Cyclic Loading Conditions: Experimental Observation and Constitutive Modelling

Energy-based Assessment of Cyclic Liquefaction Behavior of Clean and Silty Sand under Sustained Initial Stress Conditions

Undrained Behavior of Sand under Cyclic Paths That Match Storm-Wave Loading Conditions

Liquefaction of Sand under Monotonic and Cyclic Shear Conditions: Impact of Drained Preloading History

Experimental study of the mechanical behavior of calcareous sand under repeated loading-unloading

A New Parameter to Evaluate Liquefaction Resistance of Saturated Sand under Complex Dynamic Stress Paths

Comparison of Cyclic Liquefaction Behavior of Clean and Silty Sands Considering Static Shear Effect

Revisiting the liquefaction resistance of calcareous sand using X-ray CT

Effects of gradation and grain crushing on the liquefaction resistance of calcareous sand

Cyclic Behavior of Calcareous Sand from the South China Sea

Characterization of reconsolidation volumetric strain of liquefied sand and validation by centrifuge model tests

Numerical Modelling of Liquefaction in Loose Sand Deposits Subjected to Ocean Waves

Quantification of Dilatancy During Undrained Cyclic Loading and Liquefaction

Effect of Particle Shape on the Liquefaction Resistance of Calcareous Sands

Small-strain shear modulus and liquefaction resistance of calcareous sand with non-plastic fines

Stress–dilatancy behavior of dense marine calcareous sand under high-cycle loading: An experimental investigation

Experimental Study on Strength and Deformation Characteristics of Saturated Sand after Liquefaction

Liquefaction resistance and small strain stiffness of silty sand: Effects of host sand gradation and fines content

Liquefaction and post-liquefaction behaviors of unreinforced and geogrid reinforced calcareous sand

Undrained cyclic responses of biocemented calcareous silty sand