Abstract:A NASICON-type electrolyte was considered to be one of the most promising electrolytes for solid-state Na metal batteries. However, its lower ion conductivity compared to a liquid electrolyte and the formation of Na dendrites hinder its practical application. Herein, NASICON-type (Na3Zr2Si2PO12) solid-state electrolytes with developed ionic conductivity and declined electronic conductivity were synthesized through the rare earth oxide-assisted sintering method, such as Sm2O3 and Ho2O3. With the presence of Sm2O3 and Ho2O3 during sintering, the formed phosphate grain boundary phase adjusts the Si/P ratio in the NASICON structure with higher Na+ occupancy and then enhances the ionic conductivity of electrolytes. On the other hand, the formed phosphate grain boundary phase with low electronic conductivity prevents the movement of electrons at the grain boundary, reducing the probability that electrons combine with Na+ at the grain boundary to form Na-0, thereby restricting the formation of dendrites along grain boundaries. In addition, the added Sm2O3 and Ho2O3 play the role of fluxing agents to increase the densification of ceramics, further enabling the enhancement of ionic conductivity and restriction of dendrites in the voids. As a result, the obtained NZSP-0.2Sm and NZSP-0.3Ho electrolytes deliver critical current density (CCD) values of 0.85 and 0.65 mA cm(-2), respectively, at room temperature. Application of the obtained electrolytes in Na metal batteries is evaluated by assembling Na3V2(PO4)(3)vertical bar NZSP-0.2Sm/0.3Ho vertical bar Na cells, which deliver high discharge capacity values of 102.6 and 101.8 mAh g(-1) at 0.5 C after 100 cycles with capacity retention ratios of 98.3 and 98.6%, respectively. The presented results indicated that rare earth oxideassisted sintering is an effective route to improve the ionic conductivity and restrict dendrite formation for oxide ceramic solid-state electrolytes.

Enhancing Na-ion conducting capacity of NASICON ceramic electrolyte Na3.4Zr2Si2.4P0.6O12 by NaF sintering aid

Composite NASICON (Na3Zr2Si2PO12) Solid-State Electrolyte with Enhanced Na+ Ionic Conductivity: Effect of Liquid Phase Sintering

Aliovalent dual element co-assisted strategy to enhance ionic conductivity and stability of NASICON-type solid electrolyte for all-solid-state sodium batteries

Increase ionic conductivity of a Zn2+/F− synergy Na3Zr2Si2PO12 solid electrolyte for sodium metal batteries

Enhanced ionic conductivity in Na3Zr2Si2PO12 NASICON-type solid electrolytes by adding Mg2+-ions

Enhanced ionic conductivity of Cu-doped NASICON solid electrolyte for solid-state sodium batteries

Simultaneously enhancing ionic conductivity and interfacial stability by Fe 2 O 3 for solid-state sodium metal batteries

Enhanced grain connection and ionic conductivity of Na3.3La0.3Zr1.7Si2PO12 ceramic electrolyte by adding Na2B4O7

Rare Earth Oxide-Assisted Sintered NASICON Electrolyte Composed of a Phosphate Grain Boundary Phase with Low Electronic Conductivity

Bi2O3-Assisted Sintering of Na3Zr2Si2PO12 Electrolyte for Solid-State Sodium Metal Batteries

Thin NASICON Electrolyte to Realize High Energy Density Solid‐State Sodium Metal Battery

Spray Flame Synthesis of the NASICON-structure Na3Zr2Si2PO12 Solid Electrolyte Nanoparticles for Solid-State Na+ Batteries

Improvement of ionic conductivity and densification of Na3Zr2Si2PO12 solid electrolyte rapidly prepared by microwave sintering

Si3N4-Assisted Densification Sintering of Na3Zr2Si2PO12 Ceramic Electrolyte toward Solid-State Sodium Metal Batteries

Modification of NASICON Electrolyte and Its Application in Real Na-Ion Cells

Zirconia-free NaSICON solid electrolyte materials for sodium all-solid-state batteries

Engineering the NASICON Electrolyte/Na Anode Interface by Tuning the Phase of Electrolyte for Solid-State Sodium Battery

Enhanced electrochemical properties of NASICON-type Na3Zr2Si2PO12 solid electrolytes with Tb3+-ions-assisted sintering

Synthesis of High Na + Ion-Conducting NASICON-Based Electrolytes and Insights from Diffraction and Positron Annihilation Lifetime Spectroscopy Studies

Interface Ionic/Electronic Redistribution Driven by Conversion‐Alloy Reaction for High‐Performance Solid‐State Sodium Batteries

Improving Na/Na 3 Zr 2 Si 2 PO 12 Interface via SnO x /Sn Film for High‐Performance Solid‐State Sodium Metal Batteries