Abstract:A NASICON-type electrolyte was considered to be one of the most promising electrolytes for solid-state Na metal batteries. However, its lower ion conductivity compared to a liquid electrolyte and the formation of Na dendrites hinder its practical application. Herein, NASICON-type (Na3Zr2Si2PO12) solid-state electrolytes with developed ionic conductivity and declined electronic conductivity were synthesized through the rare earth oxide-assisted sintering method, such as Sm2O3 and Ho2O3. With the presence of Sm2O3 and Ho2O3 during sintering, the formed phosphate grain boundary phase adjusts the Si/P ratio in the NASICON structure with higher Na+ occupancy and then enhances the ionic conductivity of electrolytes. On the other hand, the formed phosphate grain boundary phase with low electronic conductivity prevents the movement of electrons at the grain boundary, reducing the probability that electrons combine with Na+ at the grain boundary to form Na-0, thereby restricting the formation of dendrites along grain boundaries. In addition, the added Sm2O3 and Ho2O3 play the role of fluxing agents to increase the densification of ceramics, further enabling the enhancement of ionic conductivity and restriction of dendrites in the voids. As a result, the obtained NZSP-0.2Sm and NZSP-0.3Ho electrolytes deliver critical current density (CCD) values of 0.85 and 0.65 mA cm(-2), respectively, at room temperature. Application of the obtained electrolytes in Na metal batteries is evaluated by assembling Na3V2(PO4)(3)vertical bar NZSP-0.2Sm/0.3Ho vertical bar Na cells, which deliver high discharge capacity values of 102.6 and 101.8 mAh g(-1) at 0.5 C after 100 cycles with capacity retention ratios of 98.3 and 98.6%, respectively. The presented results indicated that rare earth oxideassisted sintering is an effective route to improve the ionic conductivity and restrict dendrite formation for oxide ceramic solid-state electrolytes.

Composite NASICON (Na3Zr2Si2PO12) Solid-State Electrolyte with Enhanced Na+ Ionic Conductivity: Effect of Liquid Phase Sintering

Enhancing Na-ion conducting capacity of NASICON ceramic electrolyte Na3.4Zr2Si2.4P0.6O12 by NaF sintering aid

Enhanced ionic conductivity in Na3Zr2Si2PO12 NASICON-type solid electrolytes by adding Mg2+-ions

Bi2O3-Assisted Sintering of Na3Zr2Si2PO12 Electrolyte for Solid-State Sodium Metal Batteries

Spray Flame Synthesis of the NASICON-structure Na3Zr2Si2PO12 Solid Electrolyte Nanoparticles for Solid-State Na+ Batteries

Thin NASICON Electrolyte to Realize High Energy Density Solid‐State Sodium Metal Battery

Enhanced ionic conductivity of Cu-doped NASICON solid electrolyte for solid-state sodium batteries

Improvement of ionic conductivity and densification of Na3Zr2Si2PO12 solid electrolyte rapidly prepared by microwave sintering

Enhanced Ionic Conductivity in Na3Zr2Si2PO12 Solid Electrolyte Via Glass Addition with Low Sintering Temperature

Rare Earth Oxide-Assisted Sintered NASICON Electrolyte Composed of a Phosphate Grain Boundary Phase with Low Electronic Conductivity

Si3N4-Assisted Densification Sintering of Na3Zr2Si2PO12 Ceramic Electrolyte toward Solid-State Sodium Metal Batteries

Engineering the NASICON Electrolyte/Na Anode Interface by Tuning the Phase of Electrolyte for Solid-State Sodium Battery

Synthesis and Na+ Ion Conductivity of Stoichiometric Na3Zr2Si2PO12 by Liquid-Phase Sintering with NaPO3 Glass

Zirconia-free NaSICON solid electrolyte materials for sodium all-solid-state batteries

Aliovalent dual element co-assisted strategy to enhance ionic conductivity and stability of NASICON-type solid electrolyte for all-solid-state sodium batteries

Modification of NASICON Electrolyte and Its Application in Real Na-Ion Cells

Enhanced grain connection and ionic conductivity of Na3.3La0.3Zr1.7Si2PO12 ceramic electrolyte by adding Na2B4O7

A Niobium-Substituted Sodium Superionic Conductor with Conductivity Higher Than 5.5 Ms Cm−1 Prepared by Solution-Assisted Solid-State Reaction Method

Mg2+/F- Synergy to Enhance the Ionic Conductivity of Na3Zr2Si2PO12 Solid Electrolyte for Solid-State Sodium Batteries

Pristine NASICON Electrolyte: A High Ionic Conductivity and Enhanced Dendrite Resistance Through Zirconia (ZrO2) Impurity-free Solid-Electrolyte Design

Enhanced electrochemical properties of NASICON-type Na3Zr2Si2PO12 solid electrolytes with Tb3+-ions-assisted sintering