Abstract:Rechargeable batteries based on solid-state electrolytes are of great interest and importance for the next-generation energy storage due to their high energy output and improved safety. For building the solid-state batteries, Na3Zr2Si2PO12 (NZSP) represents a promising candidate as it features high chemical stability against air exposure and a high Na+ conductivity. NZSP pellets were usually calcined at a high temperature, and the high volatility of Na and P elements easily led to the formation of impurity phase. In this work, the effects of calcination temperature and stoichiometry on the phase purity and ionic conductivity of the NZSP electrolyte were studied. At an elevated sintering temperature, the NZSP electrolyte showed a high ionic conductivity owing to decreased porosity, and the highest ionic conductivity at 30 °C was observed to be 2.75 × 10–5 S·cm−1 with an activation energy of 0.41 eV. For the stoichiometry, the introduction of 5 mol% excessive P results in formation of more Na3PO4 and glass-like phase at the grain boundary, which caused the blurred grain boundary and reduced grain barrier, and effectively suppressed Na dendrite growth, then accounted for improved cycling performance of a Na||Na symmetric cell. Our work provided insights on reasonable design and preparation of NZSP electrolyte towards practical realization of solid-state Na-metal batteries.Graphical abstract摘要基于固态电解质的可充电电池表现出高的能量密度和高安全性, 具有重要的研究意义。其中, Na3Zr2Si2PO12(NZSP)具有高离子电导率以及高的空气稳定性, 是一类很有前景的固态电解质。NZSP通常需要高温焙烧, 但是高的焙烧温度易导致Na, P等元素的挥发, 从而导致杂相的形成。在本工作中, 我们研究了焙烧温度以及化学计量比对NZSP相结构以及离子电导率的影响。随着焙烧温度升高, NZSP电解质孔隙率降低, 电导率升高, 30 °C时最高的离子电导率为2.75 × 10–5 S·cm−1, 活化能0.41 eV。同时, 当引入5 mol%过量的P时, 产生更多的Na3PO4, 并在晶界处形成玻璃态, 从而有效抑制钠枝晶, 提高Na||Na对称电池的循环稳定性。我们的工作为NZSP电解质的设计与制备提供了新见解。

Improvement of ionic conductivity and densification of Na3Zr2Si2PO12 solid electrolyte rapidly prepared by microwave sintering

Low Temperature and Rapid Microwave Sintering of Na3Zr2Si2PO12 Solid Electrolytes for Na-Ion Batteries

Composite NASICON (Na3Zr2Si2PO12) Solid-State Electrolyte with Enhanced Na+ Ionic Conductivity: Effect of Liquid Phase Sintering

Enhancing Na-ion conducting capacity of NASICON ceramic electrolyte Na3.4Zr2Si2.4P0.6O12 by NaF sintering aid

Si3N4-Assisted Densification Sintering of Na3Zr2Si2PO12 Ceramic Electrolyte toward Solid-State Sodium Metal Batteries

Enhanced ionic conductivity in Na3Zr2Si2PO12 NASICON-type solid electrolytes by adding Mg2+-ions

Synthesis and Na+ Ion Conductivity of Stoichiometric Na3Zr2Si2PO12 by Liquid-Phase Sintering with NaPO3 Glass

Effect of sintering temperature and holding time on the crystal phase, microstructure, and ionic conductivity of NASICON-type 33Na2O-40ZrO2-40SiO2-10P2O5 solid electrolytes

Enhanced grain connection and ionic conductivity of Na3.3La0.3Zr1.7Si2PO12 ceramic electrolyte by adding Na2B4O7

Increase ionic conductivity of a Zn2+/F− synergy Na3Zr2Si2PO12 solid electrolyte for sodium metal batteries

Na 3 Zr 2 Si 2 PO 12 Solid Electrolyte Separator for Aqueous Sodium-Ion Batteries: Synthesis via the One-Step Sintering of Glass-Ceramics

Bi2O3-Assisted Sintering of Na3Zr2Si2PO12 Electrolyte for Solid-State Sodium Metal Batteries

Spray Flame Synthesis of the NASICON-structure Na3Zr2Si2PO12 Solid Electrolyte Nanoparticles for Solid-State Na+ Batteries

Na3Zr2Si2PO12 solid-state electrolyte with glass-like morphology for enhanced dendrite suppression

Enhanced ionic conductivity of Cu-doped NASICON solid electrolyte for solid-state sodium batteries

Zirconia-free NaSICON solid electrolyte materials for sodium all-solid-state batteries

Rare Earth Oxide-Assisted Sintered NASICON Electrolyte Composed of a Phosphate Grain Boundary Phase with Low Electronic Conductivity

Aliovalent dual element co-assisted strategy to enhance ionic conductivity and stability of NASICON-type solid electrolyte for all-solid-state sodium batteries

Ultrafast sintering of Na3Zr2Si2PO12 solid electrolyte for long lifespan solid-state sodium ion batteries

Formation of sodium ion conductive NaZr2(PO4)3 composite via liquid phase sintering method with sodium disilicate glass

Simultaneously enhancing ionic conductivity and interfacial stability by Fe 2 O 3 for solid-state sodium metal batteries