Photo-sensing properties of Cd-doped In2S3 thin films fabricated via low-cost nebulizer spray pyrolysis technique

S. Rajeswari,M. Mohamed Ibrahim,Abdullah M. Al-Enizi,Mohd Ubaidullah,Prabhakarn Arunachalam,Bidhan Pandit,Shoyebmohamad F. Shaikh
DOI: https://doi.org/10.1007/s10854-022-08766-w
2022-08-10
Abstract:In this study, we report the fabrication of cadmium-doped indium sulfide thin films (In 2 S 3 :Cd) using a low-cost nebulizer-aided spray pyrolysis process at 350 °C on glass substrates for photo-sensing applications. The impact of 0, 2, 4, and 8 wt% cadmium concentrations on the structure, morphology, optical properties, and photo-sensing capabilities of In 2 S 3 thin films were examined systematically. From X-ray diffraction (XRD) analysis, the major peak is located in the (103) plane for all Cd-doped In 2 S 3 thin film samples, and the maximum crystallite size for the 4 wt% sample is 59 nm. The field emission scanning electron microscope (FESEM) image revealed a homogenous large-grained surface of Cd-doped In 2 S 3 film that completely covered the substrate. UV–Vis absorption analysis demonstrated good absorption for all thin film samples in the visible and ultraviolet regions of the electromagnetic spectrum, particularly, the 4% Cd-doped concentration showed excellent absorption as is observed from Tauc relation. The highest PL intensity at 680 nm was observed for the sample coated with 4 wt% of Cd. Under UV light, the I – V behavior depicts a light current of 1.06 × 10 –6 A for a 5 V bias voltage. The In 2 S 3 : Cd (4%) sample had the highest responsivity of 2.12 × 10 −1 A/W and a detectivity of 1.84 × 10 11 Jones, with a high EQE of 50%. The study manifests that the developed Cd (4%)-doped In 2 S 3 thin film sample might be better suited for the application of photodetectors.
What problem does this paper attempt to address?