Abstract:Recycled demolition waste (RDW) and ground granulated blast furnace slag-fly ash-based geopolymer (GFG) are promising materials for treating high-plasticity clay (CH) in highway subgrades. However, the underlying synergistic stabilization mechanisms remain unclear. To elucidate the fundamental mechanisms governing post-treatment soil stabilization, a multi-scale laboratory investigation was undertaken. This investigation encompassed the evaluation of mechanical properties (compaction, California bearing ratio (CBR), and unconfined compressive strength (UCS)) to quantify the enhanced performance of the treated soil. Additionally, microstructural and mineralogical characterization was performed using X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), Scanning electron microscopy (SEM), and atomic force microscopy (AFM) to elucidate the microscopic mechanisms responsible for this improvement. The results indicated that the addition of RDW led to a reduction in the optimum moisture content (OMC) while increasing the maximum dry density (MDD) of CH. Moreover, upon incorporating RDW-GFG, the mechanical properties of the cured soil exhibited significant improvement. Specifically, the addition of 25% RDW to CH resulted in a 184% increase in CBR and effective improvement in water stability (immersion swelling percentage is reduced). Furthermore, when 25% RDW and 15% GFG were added to CH, the UCS has increased significantly by 8 times. The addition of RDW effectively enhanced the particle size distribution, compacted the soil, thus increased the shear strength. The results from XRD and SEM analyses revealed that the inclusion of GFG could generate geopolymer cementitious bonding network in the soil matrix. These materials facilitated bonding between CH particles and RDW, filling the pores and densifying the overall structure, thus increasing its strength. The synergy of RDW-GFG substantially improved the highly plastic soil through physicochemical actions, markedly elevating both its strength and water stability. Consequently, the outcomes of this experimental study offer valuable insights for road engineering applications.

Sustainability of the polymer SH reinforced recycled granite residual soil: properties, physicochemical mechanism, and applications

Intensified Test Research on the Influence of Polypropylene Fiber & Silica Fume on Recycled Concrete

Mechanical and microstructural properties of recycling granite residual soil reinforced with glass fiber and liquid-modified polyvinyl alcohol polymer

The Effect of Organic and Inorganic Modifiers on the Physical Properties of Granite Residual Soil

Total Recycling of Low-Quality Urban-Fringe Construction and Demolition Waste Towards the Development of Sustainable Cement-Free Pervious Concrete: the Proof of Concept

Optimized reinforcement of granite residual soil using a cement and alkaline solution: A coupling effect

Studies on Stress-Strain Features of Structured Granite Residual Soil

Investigation into the Enhancement Characteristics of Fly Ash and Polypropylene Fibers on Calcium Carbide-Residue-Stabilized Soil

The Effect of Length and Content of Fiber on Glass Fiber and Basalt Fiber-Reinforced Granite Residual Soil

Compressive strength of fly ash based geopolymer utilizing waste completely decomposed granite

Influence of Different Industrial Waste Residues on Engineering Properties of High Liquid Limit Soil and Its Microscopic Mechanism

A Novel Approach for Recycling Engineering Sediment Waste As Sustainable Supplementary Cementitious Materials

Recycled Excavation Soils as Sustainable Supplementary Cementitious Materials: Kaolinite Content and Performance Implications

Analysis of Erosion Characteristics and Erosion Mechanism of Polypropylene Fiber Tailings Recycled Concrete in Salt Spray Environment

Recycled polyester fiber reinforcing red mud-improved volcanic ash as a sustainable construction material

Effect of recycled polyester fiber reinforcement on the mechanical behavior and microstructure of red mud-improved volcanic ash

Mechanics, durability, and microstructure analysis of marine soil stabilized by an eco-friendly calcium carbide residue-activated coal gangue geopolymer

Mechanical performance and environmental potential of concrete with engineering sediment waste for sustainable built environment

Experimental study on shear and disintegration resistance of MICP-treated residual granite soil

Research progress on mechanical properties of geopolymer recycled aggregate concrete

Synergistic effects of recycled demolition waste and GGBS-FA based geopolymers on the mechanical properties and stabilization mechanism of high plasticity clay