Abstract:Large quantities of abandoned marine soft soil are generated from coastal engineering which cannot be directly utilized for construction without modification. The utilization of traditional binders to modify abandoned marine soft soil yields materials with favorable mechanical properties and cost efficiency. However, the production of traditional binders like cement leads to environmental pollution. This study uses a CGF all-solid-waste binder (abbreviated as CGF) composed of industrial solid waste materials such as calcium carbide residue (CCR), ground granulated blast furnace slag (GGBS), and fly ash (FA), developed by our research team, for the modification of abandoned marine soft soil (referred to as modified soil). It is noteworthy that the marine soft soil utilized in this study was obtained from the coastal area of Jiaozhou Bay, Qingdao, China. Physical property tests, compaction tests, and unconfined compressive strength (UCS) tests were conducted on the modified soil. The investigation analyzed the effects of binder content, compaction delay time, and curing time on the physical, compaction, and mechanical properties of CGF-modified soil and cement-modified soil. Additionally, microscopic experimental results were integrated to elucidate the mechanical improvement mechanisms of CGF on abandoned marine soft soil. The results show that after modification with binders, the water content of abandoned marine soft soil significantly decreases due to both physical mixing and chemical reactions. With an increase in compaction delay time, the impact of chemical reactions on reducing water content gradually surpasses that of physical mixing, and the plasticity of the modified soil notably modifies. The addition of binders results in an increase in the optimum moisture content and a decrease in the maximum dry density of CGF-modified soil, while the optimum moisture content decreases and the maximum dry density increases for cement-modified soil. Moreover, with an increase in binder content, the compaction curve of CGF-modified soil gradually shifts downward and to the right, while for cement-modified soil, it shifts upward and to the left. Additionally, the maximum dry density of both CGF-modified and cement-modified soils shows a declining trend with the increase in compaction delay time, while the optimum moisture content of CGF-modified soil increases and that of cement-modified soil exhibits a slight decrease. The strength of compacted modified soil is determined by the initial moisture ratio, binder content, compaction delay time, and curing time. The process of CGF modification of marine soft soil in Jiaozhou Bay can be delineated into stages of modified soil formation, formation of compacted modified soil, and curing of compacted modified soil. The modification mechanisms primarily involve the alkali excitation reaction of CGF itself, pozzolanic reaction, ion-exchange reaction, and carbonization reaction. Through quantitative calculations, the carbon footprint and unit strength cost of CGF are both significantly lower than those of cement.

Mechanics, durability, and microstructure analysis of marine soil stabilized by an eco-friendly calcium carbide residue-activated coal gangue geopolymer

Multiscale experimental analysis of marine clay stabilized with coal gangue–calcium carbide residue geopolymer

Mechanical Properties and Durability Analysis of CS-CG Stabilized Soil: Towards Sustainable Subgrade Soil Enhancement

Experimental study on calcium carbide residue as a combined activator for coal gangue geopolymer and feasibility for soil stabilization

Investigation into the Enhancement Characteristics of Fly Ash and Polypropylene Fibers on Calcium Carbide-Residue-Stabilized Soil

Synergetic Mechanism of Multiple Industrial Solid Waste-Based Geopolymer Binder for Soil Stabilization: Optimization Using D-Optimal Mixture Design

Physical and Mechanical Properties of All-Solid-Waste-Based Binder-Modified Abandoned Marine Soft Soil

Experimental Study on Mechanical Properties of Soft Clay Stabilized by Industrial By-Products

Synergistic effects of recycled demolition waste and GGBS-FA based geopolymers on the mechanical properties and stabilization mechanism of high plasticity clay

Feasibility of using building-related construction and demolition waste-derived geopolymer for subgrade soil stabilization

Experimental Study of the Working Property and Strength Behavior of Waste Marine Clay with High Water Content Modified with Quicklime, Ground Calcium Carbonate, and a WXS-II Soil Stabilizer

Remediation of Pb–Cd contaminated soil using coal bottom ash-based geopolymer and coir: Soil remodeling and mechanism

Experimental Feasibility Study of Geopolymer As the Next-Generation Soil Stabilizer

Modeling and optimization of fly ash–slag-based geopolymer using response surface method and its application in soft soil stabilization

Experimental Investigation of Unconfined Compression Strength and Microstructure Characteristics of Slag and Fly Ash-Based Geopolymer Stabilized Riverside Soft Soil

Field Evaluation of Soft Highway Subgrade Soil Stabilized with Calcium Carbide Residue

Study on the optimization and performance of GFC soil stabilizer based on response surface methodology in soft soil stabilization

Enhancing mechanical properties of micaceous weathered granitic soil: a synergetic approach using natural fibers and fly ash

Enhancing the mechanical and environmental performance of solidified soil using construction waste and glass micro-powder

Improvement of mechanical strength of low-plasticity clay soil using geopolymer-based materials synthesized from glass powder and copper slag

Experimental study on the stabilization of marine soft clay as subgrade filler using binary blending of calcium carbide residue and fly ash