Abstract:The growing trend of large power and high frequency in electromagnetic conversion applications urges advancements in the saturation magnetization ( M s ), effective permeability (mu e ) and core loss ( P cv ) of soft magnetic composites (SMCs). Such performance depends largely on the M s and coercivity ( H c ) of the magnetic alloys as the main component of the SMCs. It is however, difficult to simultaneously achieve large M s and low H c via binary and ternary alloy systems. Here, quaternary Fe 81-x Si 15 Co 4 Ni x (x = 0, 3, 6 at%) soft magnetic alloys have been designed with the effect of Ni addition on the microstructure and magnetic properties of the alloy revealed. On one hand, rational incorporation of Co and Ni maintains the relatively large M s . On the other hand, the Ni enters into the A2 lattice and promotes its transition into DO 3 ordered phase as confirmed by both experimental characterization and first-principles calculations. Such microstructural evolution gives rise to initially decreased magnetocrystalline anisotropy ( K 1 ) followed by increasing due to the competitive reduction effect of Ni addition and increment effect of DO 3 formation. The magnetostriction constants (A s ) increases monotonously from negative to positive values with raised Ni content. This is accompanied with the decrease in 90 degrees domain walls and increase in 180 degrees domain walls as revealed by Lorentz microscopy. Combined lowest K 1 and A s as well as optimized domain structure result in the lowest H c for the Fe 78 Si 15 Co 4 Ni 3 alloy. The corresponding SMCs exhibit excellent performance with the mu e of 160.6 and the P cv of 288.4 mW/cm 3 (50 mT, 100 kHz) combined with high M s of 177.3 emu/g, superior to other FeSi-based SMCs.

Development of a large nanocrystalline soft magnetic alloy core with high μ′pQf products for CSNS-II

Development of dual-harmonic RF system for CSNS-II

Crystallization kinetics and magnetic properties of Fe 63.5Co10Si13.5B9Cu 1Nb3 nanocrystalline powder cores

Ghz Microwave Permeability of Cofezr Amorphous Materials Synthesized by Two-Step Mechanical Alloying

Cryogenic Joule Annealing Induced Large Magnetic Field Response Of Co-Based Microwires For Giant Magneto-Impedance Sensor Applications

Soft Magnetic Properties of Magnetic Cores Assembled With a High $B_{s}$ Fe-Based Nanocrystalline Alloy

Superior High-Frequency Performances of Fe-based Soft-Magnetic Nanocrystalline Alloys

Ultrahigh Permeability at High Frequencies via A Magnetic‐Heterogeneous Nanocrystallization Mechanism in An Iron‐Based Amorphous Alloy

Design of the LLRF control system for MA cavity at CSNS RCS

Design of Quaternary FeSiCoNi Soft Magnetic Alloys Towards Large-Power and High-Frequency Applications

Development of a prototype superconducting radio-frequency cavity for conduction-cooled accelerators

Study of magnetic alloy cores for HIRFL-CSRm compressor cavity

Sodium silicate coatings for improving soft magnetic properties of FeSiAl powder cores with industrial compatibility

High-frequency magnetic characteristics and operating thermal stability of industrialized Fe76Si13B8Nb2Cu1 nanocrystalline alloy

Study of Novel Fe-Based Amorphous/Nanocrystalline Soft Magnetic Powder Cores with NiCuZnFe2O4 Coating Layer

Development of a 1/2-length prototype high field Nb3Sn magnet for the 4th generation ECR ion source

Design of Core-Shell Structured Magnetic Microwires with Desirable Properties for Multifunctional Applications

Magnetic properties of 120-mm wide ribbons of high Bs and low core-loss NANOMET® alloy

Fe-based nanocrystalline soft-magnetic alloys with low core loss and high curie temperature

Fe-Based Amorphous Magnetic Powder Cores with Low Core Loss Fabricated by Novel Gas-Water Combined Atomization Powders

High Magnetic Field Superconducting Magnet for 400 MHz Nuclear Magnetic Resonance Spectrometer