High-frequency magnetic characteristics and operating thermal stability of industrialized Fe76Si13B8Nb2Cu1 nanocrystalline alloy

Yi Cao,Fuyao Yang,Jiawei Li,Aina He,Anding Wang,Huiyun Xiao,Yaqiang Dong,Xincai Liu,Bojun Zhang,Yu Han

DOI: https://doi.org/10.1016/j.jmmm.2020.167691

IF: 3.097

2021-05-01

Journal of Magnetism and Magnetic Materials

Abstract:Increasing the saturation magnetic induction (B s) while maintaining excellent high-frequency magnetic characteristics of nanocrystalline alloys is still a challenge. Herein, Fe76Si13B8Nb2Cu1 alloy ribbons with completely amorphous precursor were industrially prepared with industrial raw materials. This industrialized nanocrystalline alloy with B s of 1.39 T has a low core loss of 179 kW/m3 at 0.2 T and 100 kHz, which is slightly higher than that of the commercially applied Fe73.5Si13.5B9Nb3Cu1 alloy with low B s of ∼ 1.24 T but lower than that of other current alloys. Besides, the real part of complex permeability (μ') of the alloy reaches 24,500 at 100 kHz under an applied filed of 0.06 A/m, which is comparable to that of Fe73.5Si13.5B9Nb3Cu1 alloys. Furthermore, the μ' in the operating temperature of 130 °C increase below 9% at 100 kHz and 2% at 200 kHz with respect to μ' at room temperature. Hence, the industrialized alloy with good castability, high-frequency magnetic performance and operating thermal stability has a good application prospect in high-frequency power electronics.

materials science, multidisciplinary,physics, condensed matter

What problem does this paper attempt to address?

### Problems the Paper Attempts to Solve

The paper primarily aims to address the following issues:

1. **Improving Saturation Magnetic Induction (Bs) While Maintaining Excellent High-Frequency Magnetic Properties**:
- Current nanocrystalline alloys (such as Finemet alloy Fe73.5Si13.5B9Nb3Cu1) have low iron loss (about 230 kW/m³) and high initial permeability (about 20000), but their saturation magnetic induction (Bs) is relatively low (about 1.24 T), which limits the miniaturization of new electrical equipment.
- The paper investigates an industrialized Fe76Si13B8Nb2Cu1 nanocrystalline alloy strip, which achieves a Bs of 1.39 T and has low iron loss (179 kW/m³) at 0.2 T and 100 kHz.

2. **High-Frequency Magnetic Properties and Operational Thermal Stability**:
- The paper provides a detailed analysis of the soft magnetic properties (iron loss and permeability) of this industrialized nanocrystalline alloy at high frequencies and its thermal stability at operating temperatures.
- At 130°C, the real part of the permeability (μ') of this alloy changes by no more than 9%, and at 200 kHz, it changes by no more than 2%.

Through these studies, the paper demonstrates that this industrialized nanocrystalline alloy has good castability, high-frequency magnetic performance, and operational thermal stability, showing great potential for application in high-frequency power electronic devices.