Abstract:New Fe82-85B13-16Si1Cu1 amorphous alloys with low B content and high B/Si content ratios were synthesized by melt spinning for developing good soft magnetic and high strength materials. The crystallization occurs through two stages and the first-stage onset temperature increases from 673 K to 705 K with increasing B content, while the second-stage temperature remains nearly constant. The first and second stages are due to the precipitation of the α-Fe(Si) phase with a size of about 30 nm and the decomposition of the remaining amorphous phase to α-Fe(Si)+Fe3B+Fe2B, respectively. The Fe-based alloys exhibited good soft magnetic properties both in annealed amorphous and nanocrystallized amorphous+α-Fe(Si) phases. The saturated magnetic flux density, coercivity and permeability at 1 kHz are 1.7 T, 4.92 A/m and 7100, respectively, for the annealed amorphous 14B alloy and 1.74 T, 5.62 A/m and 10100, respectively, for the nanocrystallized 13B alloy. The Vickers hardness (H v) is 803–867 for the as-spun state and it increases with decreasing B content. The H v increases significantly by crystallization to α-Fe+amorphous phases and reaches 997–1550 for the alloys annealed at 693–763 K just before T x2. The ultrahigh H v is presumably due to the combination of fine nanoscale mixed phases, high volume fraction of α-Fe(Si) without internal defects and the enrichment of B into the remaining amorphous phase. Such ultrahigh H v has not been obtained for Fe-based amorphous and crystallized alloys before and the addition of 1%Cu is essential for the ultrahigh H v and the amorphous phase formation for the Fe-rich 85%Fe alloy. The new Fe-based alloys are encouraging as future soft magnetic and ultrahigh strength materials with low material cost.

Advances in amorphous and nanocrystalline materials

Advances in amorphous and nanocrystalline magnetic materials

High-temperature Magnetic Properties of Fe-based Nanocrystalline Alloy

Optimized Giant Magnetoimpedance Effect In Amorphous And Nanocrystalline Materials

Advances in Fe-based amorphous/nanocrystalline alloys

High-frequency magnetic characteristics and operating thermal stability of industrialized Fe76Si13B8Nb2Cu1 nanocrystalline alloy

Recent Advances and Remaining Challenges in Manufacturing of Amorphous and Nanocrystalline Alloys

Design of Fe-based nanocrystalline alloys with superior magnetization and manufacturability

Nanocrystallization, good soft magnetic properties and ultrahigh mechanical strength for Fe82-85B13-16Si1Cu1 amorphous alloys

A Plastic Iron-Based Nanocrystalline Alloy with High Saturation Magnetic Flux Density and Low Coercivity Via Flexible-Annealing

Exceptionally High Saturation Magnetic Flux Density and Ultra‐low Coercivity Via an Amorphous‐nanocrystalline Transitional Microstructure in a FeCo‐based Alloy

Nanocrystalline soft magnetic materials from binary alloy precursors with high saturation magnetization

Deep supercooling solidification towards tuned amorphous/nanocrystalline dual phases for superior magnetic nanocrystalline alloys

High performance Fe-based nanocrystalline alloys with excellent thermal stability

Improving the Amorphous Forming Ability and Magnetic Properties of FeSiBPCu Amorphous and Nanocrystalline Alloys by Utilizing Carbon

Exceptionally High Saturation Magnetic Flux Density and Ultralow Coercivity Via an Amorphous–Nanocrystalline Transitional Microstructure in an FeCo‐Based Alloy

Recent progress in Fe-based amorphous and nanocrystalline soft magnetic materials

Ultrahigh Permeability at High Frequencies via A Magnetic‐Heterogeneous Nanocrystallization Mechanism in An Iron‐Based Amorphous Alloy

Soft Magnetic Properties of Magnetic Cores Assembled With a High $B_{s}$ Fe-Based Nanocrystalline Alloy

Research Progress of Fe-based Amorphous / Nanocrystalline Alloys