Abstract:Background Proximal humeral fracture is a common injury of shoulder girdle. Currently,locking plate was widely used in management of proximal humeral fractures.Known as“internal fixator”,locking plate can provide more purchase in osteoporosis humeral head,bearing more biomechanical advantages.However,some large series of clinical research showed varus deformity became one of the main complication of proximal humeral fractures treated with locking plate that caused by axial instability.Multi-center trail found that medial cortex defect of proximal metaphyseal of humerus was an independent risk factor of reduction loss and varus malunion.Furthermore,such pathophysiological biomechanic basis was still vague.Our research was planned to study the relationship between medial cortex defect and axial stability of locking plate fixed proximal humeral fracture,in order to find inner rule of how medial cortex defect affect locking plate fixation of proximal humeral fracture.Methods Eighteen adult humerus specimen(6 pairs male),average death age 63.4 years(49-73).All the specimen were excluded bone tumor and occult fracture.Fracture model were prepared at X-Y table.Specimen were cut to 200mm from proximal to shaft.Fracture line was cut at surgical neck perpendicular to humeral shaft.Five millimeter medial cortex defect were also created by T-Saw.All the specimen were fixed using Synthesis PHILOS (Proximal Humerus Internal Osteosythesis System)following AO fixation rules.Specimens were randomized into contrast group, medial cortex half defect group and medial cortex quarter defect group.Axial compression and shear test were done in RGM-40XX2100 machine (Load scale 10 kN,± 1% ).Mechanical Load:Preload:50N,Velocity:5 mm/min,Maximum displacement:5 mm.In axial compression and shear tests,the slope of the load de ection curve was used to compute baseline axial stiffness.Each test was repeated three times and average stiffness was calculated.Statistical analyses were performed with PAWS software (ver.18.0;IBM Inc.,USA).The data were summarized as medians (ranges).The Anova test with LSD correction was applied to detect differences between subgroups.The level of statistical significance was defined as P <0.05.Results In axial compression test,mechanical load stiffness of medial defect half group [(218.7 ± 64.3 )N/mm]was significantly weak than that of contrast group [(804.7 ± 80.5)N/mm]and quarter defect group [(727.8±66.9)N/mm,t =-22.572,P <0.05].In shear force test,it was the same condition that medial cortex half defect group had less stiffness (207.3 ± 55.5 N/mm vs 602.7±66.7 N/mm,t =-1 9.1 71,P <0.05).However,little difference was found between quarter defect group and medial contact group in both axial stiffness (t = -1.263,P >0.05)and shear resistance (t = -5.41,P >0.05 ).Conclusions Medial cortex defect may largely decrease stability of proximal humeral fracture fixed with locking plate in axial compression and shear resistance.In clinical practice,more attention should be payed in reconstruction of such structure.

Numerical simulation and biomechanical analysis of locking screw caps on clavicle locking plates

The biomechanical study of a modified lumbar interbody fusion-crenel lateral interbody fusion (CLIF): a three-dimensional finite-element analysis.

Study on the characteristics of increased mechanical stiffness according to changes in LCP shape to reinforce clavicle fractures

Canceling Notch Improves the Mechanical Safety of Clavicle Locking Plate: A 3D Finite Element Study.

[Finite element analysis of anatomic plate fixation for proximal clavicular fractures]

Minimally invasive percutaneous plate osteosynthesis with locking TCP versus dynamic condylar screw in the internal fixation of comminuted fracture of the distal femur

Biomechanical superiority of locking plate designed with cluster of head screws compared to conventional buttress plate for fixation of posteromedial tibial plateau fractures: A computational assessment

Locking Plates With Computationally Enhanced Screw Trajectories Provide Superior Biomechanical Fixation Stability of Complex Proximal Humerus Fractures

Using Suture and Locking Anatomical Bridging Plate to Fix Comminuted Mid-Shaft Clavicle Fractures with Intramedullary Nail Assistance in Reduction.

Biomechanical Assessment of Screw Safety Between Far Cortical Locking and Locked Plating Constructs.

The plate fixation strategy of complex proximal humeral fractures

Biomechanical analysis of a novel clavicular hook plate for the treatment of acromioclavicular joint dislocation: A finite element analysis

Locking vs. non-locking plate fixation in comminuted talar neck fractures: a biomechanical study using cadaveric specimens

A Locking Plate Designed With Cluster of Head Screws Would Be Biomechanically Superior Than Conventional Buttress Plate For The Fixation of Posteromedial Tibial Plateau Fractures: A Computational Assessment

Clinical outcomes of dual 3.5-mm locking compression plate fixation for humeral shaft fractures: Comparison with single 4.5-mm locking compression plate fixation

[Complication Analysis of Proximal Humeral Fractures Treated with Locking Plate].

Finite element analysis of the treatment of a minimally invasive approach combined with a novel anatomical locking plate for scapular body fractures

Biomechanical analysis of plate versus K-wire fixation for metacarpal shaft fractures with wedge-shaped bone defects

Conical coupling angular stable plate fixation: a retrospective study

The biomechanical study of medial cortex defect on axial stability of proximal humeral fracture fixed with locking plate

Failure Analysis of a Humeral Shaft Locking Compression Plate—Surface Investigation and Simulation by Finite Element Method