Abstract:<p>Direct Laser Deposition (DLD) opens new ways for the fabrication of tools with intricate designs as well as for dies and molds repairing. However, non-equilibrium, and highly dynamic characteristics of the DLD process, generally result in non-equilibrium microstructures, inhomogeneities across the build height, and unwanted phase transformations. This might lead to non-uniform and highly scattered mechanical properties. This highlights the need for a proper thermal post-processing aimed at achieving application-specific mechanical properties. AISI H13, which is commonly used in hot-forming applications (e.g., die casting tooling, extrusion dies), shows high potential in the rapid manufacturing of the tools by additive manufacturing (AM). In this study, the influence of the as-built microstructure on direct tempering response as well as tempering after austenitization and quenching of DLD H13 tool steel is evaluated. The factors governing hardness and tempering behavior are discussed in detail with the aid of microstructural analysis and isochronal tempering studies. As-built microstructure comprised martensite, inter-cellular/inter-dendritic retained austenite (RA), and solidification carbides. Decomposition of retained austenite by direct tempering of the as-built samples led to a stronger secondary hardening peak and a shift of this peak to higher temperature. Austenitized and quenched samples contained ≤2 vol.% retained austenite. Increasing the austenitization temperature and time led to the dissolution of a larger vol.% of solidification carbides, recovery of the micro-segregation, recrystallization and grain growth. In quenched and tempered parts, hardness increased by increasing austenitization temperature from 1020°C to 1060°C as a result of higher supersaturation of quenched martensite leading to larger vol.% of secondary carbide precipitation. Within the whole technically significant tempering range, highest hardness was achieved by direct tempering of the as-built material.</p>

Microstructure and properties of a novel carbon‐martensitic hot work tool steel processed by Laser Additive Manufacturing without preheating

Effects of laser additive manufacturing on microstructure and crystallographic texture of austenitic and martensitic stainless steels

Influence of an Increasing Alloying Content on the Microstructure of a High‐Speed Steel in the Laser‐Powder Bed Fusion Process

Crack-free in situ heat-treated high-alloy tool steel processed via laser powder bed fusion: microstructure and mechanical properties

Microstructure, strain-rate sensitivity, work hardening, and fracture behavior of laser additive manufactured austenitic and martensitic stainless steel structures

Tempering behavior of a direct laser deposited hot work tool steel: Influence of quenching on secondary hardening and microstructure

Influence of solidification structure on austenite to martensite transformation in additively manufactured hot-work tool steels

Local laser softening of press-hardened steel at high feed rates

Laser Directed Energy Deposition of High-Carbon High-Chromium D2 Tool Steel Structures: Processing, Heat Treatment and Material Behavior

Deformation-Induced Strengthening Mechanism in a Newly Designed L-40 Tool Steel Manufactured by Laser Powder Bed Fusion

Investigation of the Microstructure and Mechanical Properties of an Ultrahigh Strength Martensitic Steel Fabricated Using Laser Metal Deposition Additive Manufacturing

Microstructure, hardness, and tribological performance of D2 tool steel fabricated by laser cladding using pulsed wave and substrate heating

Influence of initial defect density on mechanical properties of AISI H13 hot-work tool steel produced by laser powder bed fusion and hot isostatic pressing

Influence of Preheating Temperature on Microstructure Evolution and Hardness of High‐Speed Steel AISI M50 Processed by Laser Powder Bed Fusion

Local laser softening of high-strength steel with an adapted intensity

Point-by-point laser exposure for crack susceptibility reduction in Powder Bed Fusion processing of H11 tool steel

Additive Manufacturing of AISI H13 Tool Steel with Combinations of Higher Laser Power and Scan Speed: Microstructural and Mechanical Properties Insights

Influence of post-processing heat-treatment on the mechanical performance of AISI 410L stainless steel manufactured by the L-DED process

Hot Work Tool Steel Processed by Laser Powder Bed Fusion: A Review on Most Relevant Influencing Factors

PBF-LB/M of Low-Alloyed Steels: Bainite-like Microstructures despite High Cooling Rates

Characteristics of a Modified H13 Hot-Work Tool Steel Fabricated by Means of Laser Beam Powder Bed Fusion