Abstract:<p>Rapid solidification cellular structures are known to play a crucial role in helping achieve high strength and high ductility in 316L austenitic stainless steels fabricated by laser powder-bed-fusion (L-PBF). Despite this, the understanding of their intrinsic characteristics (e.g., crystallographic orientations, dislocations, precipitates, elemental segregations) and the respective impacts on the material's strength and thermal stability remains nebulous. We conduct several dedicated transmission electron microscopy (TEM) studies to investigate these strengthening mechanisms and identified that cell walls follow specific crystallographic orientations. The high density of tangled dislocations inside cell walls are found to have a higher tendency to dissociate, forming wider stacking faults while oxide precipitates are confined inside cell walls. These features act as barriers to moving dislocations upon plastic deformation and contribute to the high strength. Our dislocation dynamic simulations indicate that segregated particles are effective in blocking dislocations locally, helping the formation of dislocation cells and participating to the material strengthening. To study the thermal stability of L-PBF 316L SS, we perform systematic post-processing heat treatments from 400-1200°C. Microstructure characterizations using electron backscatter diffraction, TEM, and synchrotron X-ray diffraction coupled with dislocation dynamics and CALPHAD simulations and tensile testing reveal three heat treatment zones where the structure-property relationship can be tuned. After annealing up to 600°C, the microstructure remains stable; but the work hardening behavior is altered with a material that retains high strength and high ductility. Annealing between 600-1000°C activates elemental diffusion and gradual disappearance of cell walls, leading to a sharp drop in yield strength and a tradeoff between strength and ductility. Low-angle grain boundaries remain stable up to 1000°C while the average grain size defined by high angle grain boundaries is near constant at annealing temperatures up to 800°C. Annealing above 1100°C removes all L-PBF microstructure footprints and renders a conventional-like microstructure. Compared to conventional materials, L-PBF 316LSS displays substantially higher thermal stability and superior performance at elevated temperatures.</p>

Deformation-Induced Strengthening Mechanism in a Newly Designed L-40 Tool Steel Manufactured by Laser Powder Bed Fusion

Experimental investigation on the deformation behavior of an isotropic 304L austenitic steel manufactured by laser powder bed fusion with hot isostatic pressing

Enhancing Strength and Plasticity Synergy in Transformation-Induced Plasticity-Aided Lean Duplex Stainless Steel Based on the Ultrafine-Grained Austenite

Strength-plasticity transition mechanism after the solution treatment of GH3230 superalloy fabricated via laser powder bed fusion

Microstructural Evolution and Strengthening Mechanism in Laser Powder Bed Fusion 316L Stainless Steel with High Strength and Ductility

Experimental Characterization and Strengthening Mechanism of Process-Structure-property of Selective Laser Melted 316 L

Tailoring the Microstructural and Mechanical Properties of 316L Stainless Steel Manufactured by Laser Powder Bed Fusion

High Temperature High Strength Austenitic Steel Fabricated by Laser Powder-Bed Fusion

Microstructure, mechanical properties, and deformation behaviour of LPBF 316L via post-heat treatment

Innovative Fabrication Design for In Situ Martensite Decomposition and Enhanced Mechanical Properties in Laser Powder Bed Fused Ti6Al4V Alloy

Revealing the Enhancement Mechanism of Laser Cutting on the Strength–Ductility Combination in Low Carbon Steel

Achieving Ultrahigh Yield Strength and Decent Toughness in an In-Situ Alloyed H13 Steel Via Laser Powder Bed Fusion

New insights on cellular structures strengthening mechanisms and thermal stability of an austenitic stainless steel fabricated by laser powder-bed-fusion

Influence of solidification structure on austenite to martensite transformation in additively manufactured hot-work tool steels

Fatigue and tensile deformation behaviors of laser powder bed fused 304L austenitic stainless steel

Unveiling the Cellular Microstructure–property Relations in Martensitic Stainless Steel Via Laser Powder Bed Fusion

Strain Hardening in Twinning-Induced Plasticity Stainless Steel Produced by Laser Powder Bed Fusion

In-situ investigation into the deformation behavior of Ti-6Al-4V processed by laser powder bed fusion

Strengthening Mechanisms and Strain Hardening Behavior of 316L Stainless Steel Manufactured by Laser‐Based Powder Bed Fusion

Laser directed energy deposition remanufacturing of LPBF-processed TA15 parts: Hybrid process interface induced microstructure inheritance and mechanical performance

Developing ductile and isotropic Ti alloy with tailored composition for laser powder bed fusion