Abstract:EPB shield tunnel construction will discharge a large amount of soil. Directly transporting this discharged soil to dumping grounds not only increases the machinery and labor costs but also raises environmental concerns. In this paper, we presented and explored a guiding framework for recycling the discharged soil from EPB shield tunnel construction as the raw materials for synchronous grouting. The proposed method was proved to be feasible by a detailed experimental study based on samples taking from the Zhengzhou metro line 3 project. The preparation and formulation process of those raw materials was designed to meet the requirements not only for engineering application but also for green environmental protection and sustainable development. The properties and performance of the synchronous grouting material, including its specific gravity, fluidity, gel time, bleeding rate, bulk shrinkage rate and unconfined compression strength, were investigated by the U15* (154) uniform design experimentation. The effects of ratios of water/binder (cement + fly flash), the binder/coarse-grains (the discharged soil from the west bound tunnel + river sand), fine-grains (the discharged soil from the east bound tunnel)/water and the fly flash/cement on the response value of the synchronous grouting material performances have been investigated with stepwise nonlinear regression analysis model and 3D response surface diagrams. Moreover, the optimal mass ratio for the synchronous grout is also proposed with a new Goal Programming model to obtain an optimum performance. The results indicate that the discharged soil from the east bound tunnel in this project can be directly reused as bentonite, while the discharged soil from the west bound tunnel should be mixed with river sand at a mass ratio of 1:1 before reusing it as the raw material of synchronous grout. Furthermore, the performance of the synchronous grouting was demonstrated highly depending on the proper selection and optimization of mass ratios for water/binder, binder/coarse-grains, fine-grains/water and fly-ash/cement. The presented experimental investigation and the proposed strategy for determining the optimal formulation for synchronous grouting materials demonstrated a feasible way of recycling discharged soil from EPB shield tunnel construction.

Feasibility Studies on the Utilization of Recycled Slag in Grouting Material for Tunneling Engineering

Utilization of Tunnel Waste Slag for Cement-Stabilized Base Layers in Highway Engineering

Reuse of Discharged Soil from Slurry Shield Tunnel Construction as Synchronous Grouting Material

Recycling of discharged soil from EPB shield tunnels as a sustainable raw material for synchronous grouting

Feasibility Study of the Synergistic Use of Sludge and Coal-Based Solid Waste to Produce Environmentally Friendly Grouting Materials

Research on rheology performance and sealing effect of alkali-activated GGBS paste used for tunnel leakage plugging

Technical and environmental assessment of sludge-derived slag generated from high temperature slagging co-gasification process as a sustainable construction material

Research on Sustainable Development of Fine-Grained Material Cement Slurry

Reusing Fine Silty Sand Excavated from Slurry Shield Tunnels as a Sustainable Raw Material for Synchronous Grouting

Laboratory investigation of solid wastes combined with tunnel slag in cement stabilized base of asphalt pavement

Effect of Grouting Reinforcement on Settlement of Existing Tunnels: Case Study of a New Crossing Underpass

Study and Application of Gneiss in Preparation of Graded Gravel Base Material

Application of a novel grouting material for prereinforcement of shield tunnelling adjacent to existing piles in a soft soil area

Evaluation of particle size distribution and mechanical properties of mineral waste slag as filling material

A Review on Development of Industrial Solid Waste in Tunnel Grouting Materials: Feasibility, Performance, and Prospects

Study on Effects of Refining Slag on Properties and Hydration of Cemented Solid Waste-Based Backfill

Research and implementation of eco-grouting material derived from shield tunneling muck

Synergistic mechanism of physical chemistry and acid bacteria: Product evolution of sulphides during tunnel mining

Mechanical properties and solidification mechanism of coal gangue-granulated blast furnace slag geopolymer stabilized engineering slurry

Analysis of Basic Physical and Chemical Characteristics of Manganese Slag before and after Solidification and Its Feasibility as Highway Slope

Effect of Steel Slag and Granulated Blast-furnace Slag on the Mechanical Strength and Pore Structure of Cement Composites