Abstract:EPB shield tunnel construction will discharge a large amount of soil. Directly transporting this discharged soil to dumping grounds not only increases the machinery and labor costs but also raises environmental concerns. In this paper, we presented and explored a guiding framework for recycling the discharged soil from EPB shield tunnel construction as the raw materials for synchronous grouting. The proposed method was proved to be feasible by a detailed experimental study based on samples taking from the Zhengzhou metro line 3 project. The preparation and formulation process of those raw materials was designed to meet the requirements not only for engineering application but also for green environmental protection and sustainable development. The properties and performance of the synchronous grouting material, including its specific gravity, fluidity, gel time, bleeding rate, bulk shrinkage rate and unconfined compression strength, were investigated by the U15* (154) uniform design experimentation. The effects of ratios of water/binder (cement + fly flash), the binder/coarse-grains (the discharged soil from the west bound tunnel + river sand), fine-grains (the discharged soil from the east bound tunnel)/water and the fly flash/cement on the response value of the synchronous grouting material performances have been investigated with stepwise nonlinear regression analysis model and 3D response surface diagrams. Moreover, the optimal mass ratio for the synchronous grout is also proposed with a new Goal Programming model to obtain an optimum performance. The results indicate that the discharged soil from the east bound tunnel in this project can be directly reused as bentonite, while the discharged soil from the west bound tunnel should be mixed with river sand at a mass ratio of 1:1 before reusing it as the raw material of synchronous grout. Furthermore, the performance of the synchronous grouting was demonstrated highly depending on the proper selection and optimization of mass ratios for water/binder, binder/coarse-grains, fine-grains/water and fly-ash/cement. The presented experimental investigation and the proposed strategy for determining the optimal formulation for synchronous grouting materials demonstrated a feasible way of recycling discharged soil from EPB shield tunnel construction.

A Review on Development of Industrial Solid Waste in Tunnel Grouting Materials: Feasibility, Performance, and Prospects

A state-of-art review on development and progress of backfill grouting materials for shield tunneling

The Potential of Recycling and Reusing Waste Materials in Underground Construction: A Review of Sustainable Practices and Challenges

Critical review for the potential analysis of material utilization from inorganic industrial solid waste

A literature review on properties and applications of grouts for shield tunnel

Feasibility Studies on the Utilization of Recycled Slag in Grouting Material for Tunneling Engineering

Research and implementation of eco-grouting material derived from shield tunneling muck

Research on Sustainable Development of Fine-Grained Material Cement Slurry

Feasibility Study of the Synergistic Use of Sludge and Coal-Based Solid Waste to Produce Environmentally Friendly Grouting Materials

Review of the Preparation and Application of Porous Materials for Typical Coal-Based Solid Waste

Review and Prospects of New Materials in Urban Underground Development

Recycling of discharged soil from EPB shield tunnels as a sustainable raw material for synchronous grouting

Application of geopolymers for treatment of industrial solid waste containing heavy metals: State-of-the-art review

Research status of comprehensive utilization of coal-based solid waste (CSW) and key technologies of filling mining in China: A review

Reuse of Discharged Soil from Slurry Shield Tunnel Construction as Synchronous Grouting Material

Mechanism and Engineering Characteristics of Expansive Soil Reinforced by Industrial Solid Waste: A Review

Research on the preparation and diffusion characteristics of coal seam bottom fracture grouting material based on solid waste synergy

Application of a novel grouting material for prereinforcement of shield tunnelling adjacent to existing piles in a soft soil area

Sustainable solutions: Transforming waste shield tunnelling soil into geopolymer-based underwater backfills

A State-of-the-Art Review on the Study of the Diffusion Mechanism of Fissure Grouting

Reusing Fine Silty Sand Excavated from Slurry Shield Tunnels as a Sustainable Raw Material for Synchronous Grouting