Recycling of discharged soil from EPB shield tunnels as a sustainable raw material for synchronous grouting

Cong Zhang,Junsheng Yang,Jinyang Fu,Shuying Wang,Jian Yin,Yipeng Xie

DOI: https://doi.org/10.1016/j.jclepro.2020.121947

IF: 11.1

2020-09-01

Journal of Cleaner Production

Abstract:EPB shield tunnel construction will discharge a large amount of soil. Directly transporting this discharged soil to dumping grounds not only increases the machinery and labor costs but also raises environmental concerns. In this paper, we presented and explored a guiding framework for recycling the discharged soil from EPB shield tunnel construction as the raw materials for synchronous grouting. The proposed method was proved to be feasible by a detailed experimental study based on samples taking from the Zhengzhou metro line 3 project. The preparation and formulation process of those raw materials was designed to meet the requirements not only for engineering application but also for green environmental protection and sustainable development. The properties and performance of the synchronous grouting material, including its specific gravity, fluidity, gel time, bleeding rate, bulk shrinkage rate and unconfined compression strength, were investigated by the U15* (154) uniform design experimentation. The effects of ratios of water/binder (cement + fly flash), the binder/coarse-grains (the discharged soil from the west bound tunnel + river sand), fine-grains (the discharged soil from the east bound tunnel)/water and the fly flash/cement on the response value of the synchronous grouting material performances have been investigated with stepwise nonlinear regression analysis model and 3D response surface diagrams. Moreover, the optimal mass ratio for the synchronous grout is also proposed with a new Goal Programming model to obtain an optimum performance. The results indicate that the discharged soil from the east bound tunnel in this project can be directly reused as bentonite, while the discharged soil from the west bound tunnel should be mixed with river sand at a mass ratio of 1:1 before reusing it as the raw material of synchronous grout. Furthermore, the performance of the synchronous grouting was demonstrated highly depending on the proper selection and optimization of mass ratios for water/binder, binder/coarse-grains, fine-grains/water and fly-ash/cement. The presented experimental investigation and the proposed strategy for determining the optimal formulation for synchronous grouting materials demonstrated a feasible way of recycling discharged soil from EPB shield tunnel construction.

environmental sciences,green & sustainable science & technology,engineering, environmental