Abstract:To realize the utilization of industrial solid waste resources and solve the shortage problem of pavement materials, this paper uses steel slag, mineral powder, and coal gangue to prepare a mixture. A uniform test with 2 factors and 6 levels was designed. Through regression analysis, response surfaces were established to study the mechanical properties of the coal gangue mixture. The hydrated products at different ages were microscopically analyzed by XRD and SEM. The durability including freeze-thaw cycles, dry and wet cycles, and immersion expansion rate were researched. The results show that the 7d unconfined compressive strength of the mixture reaches 2.14 – 6.46 MPa, with a 180d resilience modulus of 954 – 1098 MPa, and a 180d splitting tensile strength of 0.66 – 0.83 MPa. With the increase of steel slag content, the 7d unconfined compressive strength of the mixture first decreases and then increases. The content of mineral powder is positively correlated with the 7d unconfined compressive strength. The 180d compressive resilience modulus decreases first and then increases with the increase of steel slag and mineral powder content. The 180d splitting tensile strength is positively correlated with the content of steel slag and mineral powder. The mixture is less affected by freeze-thaw cycles, with mass loss rates of only 1.77 % – 2.13 %. The mass loss rate of the admixture is 0.87 % – 0.99 % after 10 dry and wet cycles, and the strength is slightly improved. The maximum expansion rate of the mixtures immersed in water for 10d is only 0.28 %. The hydrated reaction between steel slag, mineral powder and coal gangue promotes the formation of more hydration products such as AFt, C-S-H, CaAl2(SiO4), and Ca(OH)2. The C-S-H and CaAl2(SiO4) are intertwined into a dense network to wrap Ca(OH)2, which improves the compactness of the mixture and effectively resists the freeze-thaw expansion stress. The steel slag-mineral powder-coal gangue mixture meets the requirements of relevant norms and can be well used in pavement bases.

Study and Application of Gneiss in Preparation of Graded Gravel Base Material

Laboratory Evaluation On The Performance Of Porous Asphalt Mixture With Steel Slag For Seasonal Frozen Regions

Aggregation and Dehydration of Excavated Soft Clay and Use for Subgrade Engineering-Part 2: A Pilot-Scale Study

Utilization of Tunnel Waste Slag for Cement-Stabilized Base Layers in Highway Engineering

Analysis of Basic Physical and Chemical Characteristics of Manganese Slag before and after Solidification and Its Feasibility as Highway Slope

Laboratory investigation of solid wastes combined with tunnel slag in cement stabilized base of asphalt pavement

Performance Study of Stabilized Recycled Aggregate Base Material with Two-Gray Components

Investigating the compaction and the mechanical behaviors of coal gangue as subgrade filler and constructing highway subgrade in practice

Compaction Procedures and Associated Environmental Impacts Analysis for Application of Steel Slag in Road Base Layer

Study on Road Performance of Cement Fly Ash Stabilized Steel Slag-Concrete Recycled Macadam

Isotropic Compression and Triaxial Shear Behaviors of Cement- and Cement-Gravel-treated Granite Residual Soil for Use As Subgrade Filling

Evaluation of particle size distribution and mechanical properties of mineral waste slag as filling material

Mechanical Properties and Durability of Steel Slag-mineral Powder-coal Gangue Mixture by Uniform Design for Pavement Base

Feasibility Studies on the Utilization of Recycled Slag in Grouting Material for Tunneling Engineering

Experimental Study on the Mechanical Properties of Basalt Fiber Geogrids Reinforced with Cement-Stabilized Macadam

A comprehensive evaluation on particles breakage characteristics of waste argillaceous gangue as subgrade filler

Study on Performance Tests and the Application of Construction Waste as Subgrade Backfill

Investigation on the application of steel slag–fly ash–phosphogypsum solidified material as road base material

Research on Mechanical Properties and Design Methods of Graded Gravel in Intercity Railways

Evaluation of the applicability of gasification coarse slag as a fine aggregate in controlled low-strength material: preparation, performance, and environmental effect

Feasibility Evaluation of Preparing Asphalt Mixture with Low-Grade Aggregate, Rubber Asphalt and Desulphurization Gypsum Residues