Abstract:The gradation and mechanical properties of aggregates impressively affect the load carrying capacity and rutting resistance of asphalt mixtures. They are able to provide some fundamental parameters that are linked to mixture performance. In order to accurately detect critical controlled sizes and obtain more fundamental parameters that can characterize load carrying capacity and rutting resistance of asphalt mixtures, this paper aims to develop a mechanics-based approach to evaluate aggregate gradation, which contains the theoretical packing analysis and discrete element simulation. An extended theoretical morphology framework is developed by checking the local and global interlock of graded aggregates in the theoretical packing analysis. The sieve size range of primary structure which has an interactive interlock can be determined in the local interlock check model. The relationship between the transferred force and the induced force is proposed in the densest and loosest packing arrangements, respectively. The morphological parameters of disruption factor and weighted average size for the global scale are also proposed in theoretical packing analysis. Then the discrete element method is used to validate the theoretical framework. The advanced gradation input algorithm procedure is established in the discrete element simulation to simulate the compression test of graded aggregates. The mechanical parameters of contact force, contact points and stress-strain curves are extracted from the simulation results. The results show that the discrete element method can validate the theoretical framework and output the performance related parameters. The contact force analysis shows that the aggregates retaining on sieve sizes of 2.36 and 4.75 mm provide more than 50% contribution to resist load, and the aggregates retaining on sieve sizes of 1.18, 0.6 and 0.3 mm provide more than 50% contribution to stabilize the structure. The coordination number analysis suggests that the gradation with more fine aggregates might lead to a greater number of voids but smaller air-void size when the asphalt content and porosity remain constant. The stress-strain curve analysis shows that the modulus and secondary strain are highly related to the rutting performance of an asphalt mixture. (C) 2019 Elsevier Ltd. All rights reserved.

A comprehensive evaluation on particles breakage characteristics of waste argillaceous gangue as subgrade filler

Mechanical Evaluation of Aggregate Gradation to Characterize Load Carrying Capacity and Rutting Resistance of Asphalt Mixtures

Back Analysis of Parameters for Construction Garbage As Road Fill

Investigating the compaction and the mechanical behaviors of coal gangue as subgrade filler and constructing highway subgrade in practice

Particle breakage investigation of construction waste recycled aggregates in subgrade application scenario

Experimental Investigation of the Compaction-Crushing Characteristics of Graded Fractured Coal Gangue Based on Infill Mining

Effect of aggregate size distribution and confining pressure on mechanical property and microstructure of cemented gangue backfill materials

Analysis of granular mechanical parameters characteristics in graded gravel triaxial test

Experimental Study On Particle Breakage Of Carbonate Gravels Under Cyclic Loadings Through Large-Scale Triaxial Tests

Evaluation of particle size distribution and mechanical properties of mineral waste slag as filling material

Study on the mechanical properties of geogrid-reinforced tunnel slag and particle breakage

Particle size distribution of aggregates effects on mesoscopic structural evolution of cemented waste rock backfill

Fractal characteristics of graded aggregate in asphalt mixture

Simulation experimental investigations on particle breakage mechanism and fractal characteristics of mixed size gangue backfill materials

Influence of Grain Gradation on Permanent Strain of Unbound Granular Materials under Low Confining Pressure and High-Cycle Loading

Evaluating the Crushing Characteristics of Recycled Construction and Demolition Waste for Use in Road Bases

Study on the Permanent Deformation and Dynamic Stress–Strain of Coarse-Grained Subgrade Filler under Cyclic Loading

Reutilization of gangue wastes in underground backfilling mining: Overburden aquifer protection

Effects of initial particle gradation and rock content on crushing behaviors of weathered phyllite fills – A case of eastern Ankang section of Shiyan–Tianshui highway, China

Study and Application of Gneiss in Preparation of Graded Gravel Base Material

Experimental Investigation of the Particle Breakage of Coarse-Grained Materials Under Impact Loading