Abstract:Aluminum doped zinc oxides show a high electrical conductivity owing to their high electron concentration in the conduction band, which significantly hinders the development of p-n junction due to the formation of degenerate states. To overcome this limitation, it is proposed to improve the electron mobility rather than the free electron concentration. For this specific aspect, vanadium appears to be one of the most suited alternatives as a doping element. In this work, we report on the preparation of ZnO and vanadium-doped ZnO thin films by spray pyrolysis process. Vanadium loads were varied from 0 to 4 at.% in the ZnO films and its effect on the structural, morphological, chemical, optical, and mechanical properties of the fabricated thin films was investigated through a bench of characterizations techniques, including X-ray diffraction (XRD), atomic force microscope (AFM), X-ray photoelectron spectroscope (XPS), time-of-flight secondary ion mass spectroscopy (TOF-SIMS), UV-Vis spectrophotometer, and digital Vickers microhardness tester. The obtained results demonstrate the successful formation of pristine ZnO films and V-doped ZnO, which were found to be polycrystalline with a hexagonal wurtzite crystal structure. According to the self-correlation function, AFM images reveal that the particle size increases with respect to the V-load. TOF-SIMS analyses confirm the constant distribution of Zn, O and V elements throughout the film thickness. Moreover, our films are found to be optically transparent in the 400–1200 nm range with associated band gaps energy ranging from 3.18 to 3.26 eV. Finally, mechanical measurements have been carried out using a conventional diamond-pyramidal-indenter Vickers test. The results confirmed that by increasing V concentration, the microhardness increases.

Growth and characterization of transparent vanadium doped zinc oxide thin films by means of a spray pyrolysis process for TCO application

The prospect of spray pyrolyzed pure, Mn-doped, and Zn-doped nickel oxide thin films as TCO material

Study on the Electrical and Optical Properties of Vanadium Doped TiN Thin Films Prepared by Atmospheric Pressure Chemical Vapor

Transparent Conductive Titanium and Fluorine Co‐doped Zinc Oxide Films

D-Electron-dependent Transparent Conducting Oxide of V-doped ZnO Thin Films

Spray pyrolyzed surface-modified ZnO thin films via cobalt doping: Optical, structural and morphological properties

Structural, Morphological and Optical Characterization of Tin Doped Zinc Oxide Thin Film by (SPT)

Preparation and Characterization of Sprayed In2O3:Mo Films

Preparation and Characteristics of Natively Textured Surface ZnO:Al-TCO Thin Films Grown Via Magnetron Sputtering

Influence of Concentration of Vanadium in Zinc Oxide on Structural and Optical Properties with Lower Concentration

Preparation, Microstructure and Photoelectrical Properties of Tantalum-doped Zinc Oxide Transparent Conducting Films

Natively Textured Surface Al-doped ZnO-TCO Layers with Gradual Oxygen Growth for Thin Film Solar Cells Via Magnetron Sputtering

Preparation of Al Doped ZnO Transparent Conductive Films by Ultrasonic Spray Pyrolysis

Investigation of Molybdenum Doped ZnO Thin Films Prepared by Spray Pyrolysis Technique

Effect of substrate and substrate temperature on microstructure of magnetron sputtering doped-ZnO thin films

Textured transparent conductive B/Al doped ZnO films utilizing reactive magnetron sputtering

Tuning the Transparency Window of SrVO3 Transparent Conducting Oxide

Electrical and optical performance of transparent conducting oxide films deposited by electrostatic spray assisted vapour deposition

Preparation and Characterization of Transparent Conductive Zinc Doped Tin Oxide Thin Films Prepared by Radio-Frequency Magnetron Sputtering

Effect of Doping with Zinc Oxide on The Structural, Surface, and Optical Properties of Titanium Dioxide Thin Films

Impact of Al and In co-doping on transmittance, bandgap energy, and electrical characteristics of ZnO films for TCO applications