Abstract:Micro-electromechanical systems and nano-electromechanical systems have attracted a great deal of attention in recent years. The flow and heat transfer behaviors of micromachines for separation applications are usually different from that of macro counterparts. In this paper, heat and mass transfer characteristics of rarefied nitrogen gas flows in microchannels are investigated using direct simulation Monte Carlo with improved pressure boundary conditions. The influence of aspect ratio and wall temperature on mass flowrate and wall heat flux in microchannels are studied parametrically. In order to examine the aspect ratio effect on heat and mass transfer behaviors, the wall temperature is set constant at 350 K and the aspect ratio of the microchannel varies from 5 to 20. The results show that as the aspect ratio increases, the velocity of the flow decreases, so does the mass flowrate. In a small aspect ratio channel, the heat transfer occurs throughout the microchannel; as the aspect ratio of the microchannel increases, the region of thermal equilibrium extends. To investigate the effects of wall temperature (Tw) on the mass flowrate and wall heat flux in a microchannel, the temperature of the incoming gas flow (Tin) is set constant at 300 K and the wall temperature varies from 200 K to 800 K while the aspect ratio is remained unchanged. Results show that majority of the wall heat flux stays within the channel entrance region and drops to nearly zero at the halfway in the channel. When TwTin, the molecular number density of the flow drops rapidly near the inlet and the temperature of the gas flow increases along the channel. As Tw increases, the flow becomes more rarefied, the mass flowrate decreases, and the resistance at the entrance region increases. Furthermore, when Tw>Tin, a sudden jump of heat transfer flux and temperature are observed at the exit region of the channel.

Influence Of Wall Temperature On Thermal Effect Of Nozzle Flowmeter

Effects of inlet turbulence intensity on wall heat transfer in a turbine guide vane

Numerical Study On Temperature Field And Spool Deformation Of Throttle Slide Valve With V-Notches

An Investigation of the Temperature Distributions Inside A Spool Valve Owing to A Viscous Heating Effect

Numerical simulation of wall pressure distribution in vortex flowmeter

Effects of Wall Temperature on the Heat and Mass Transfer in Microchannels Using the DSMC Method

Effects of the Wall Temperature on Rarefied Gas Flows and Heat Transfer in a Micro-Nozzle

A numerical investigation of conjugate forced heat transfer for a micro thermal flow sensor

Modeling Analysis and Experimental Study of a Temperature-difference Type Heat Flux Meter

Numerical Analysis of Transducer Installation Effect on Ultrasonic Gas Flow Meter

Effect Of Wall Temperature On Hypersonic Turbulent Boundary Layer

Regulation of Gas-Liquid Stratified Flow Boiling Dynamic Instabilities in Horizontal Tube: Effects of Heat Load Distribution and Wall Thermal Capacity

THE EFFECTS OF WALL HEAT FLUX ARRANGEMENT ON FLOW INSTABILITY BOUNDARY IN A VERTICAL SINGLE TUBE

Wall Temperature Effects on Aerodynamic Heating Mechanisms in Shock Wave Turbulent Boundary Layer Interaction

Direct numerical simulations of compressible turbulent channel flows with asymmetric thermal walls

Numerical Study on Internal Nozzle Flow Characteristic of Injector under Hot Fuel Conditions

Effects of wall heating on wall pressure fluctuations and flow noise in a low-Reynolds-number turbulent channel flow with temperature-dependent viscosity

Study on heat transfer and pressure steady-state characteristics of a floating nozzle under a moving wall

Effect of surface structure on fluid flow and heat transfer in cold and hot wall nanochannels

Thermal Effects On Fluid Flow In Mini/Micro Channel

Using Direct Simulation Monte Carlo with Improved Boundary Conditions for Heat and Mass Transfer in Microchannels