Abstract:This paper extends the work of Tamano & Morinishi (J. Fluid Mech., vol. 548, 2006, pp. 361–373) by simulating supersonic turbulent channel flow with asymmetric thermal walls using a larger computational domain and a finer mesh. Direct numerical simulation is carried out for four cases with different thermal wall boundaries at the top wall at fixed , and , while the bottom wall is maintained at a constant temperature of equal to the reference temperature. These cases are referred to as the adiabatic case TAd, where the top wall is adiabatic; the pseudo-adiabatic case T32, where the top wall is isothermal with temperature ; the sub-adiabatic case T25, with ; and the super-adiabatic case T40, with . Here, is the mean temperature at the adiabatic wall in the TAd case. The objective of this study is to compare and contrast the TAd case with its corresponding T32 case, and to investigate the effect of the wall temperature difference between the two isothermal walls. Comparisons of the basic turbulent statistics, the heat transfer between the Favre-averaged mean-flow kinetic energy, the Favre-averaged turbulent kinetic energy and the Favre-averaged mean internal energy, as well as the wall heat transfer properties, indicate that the TAd case and its corresponding T32 case are generally equivalent. The only discernible difference is in the region very close to the top wall for the temperature-fluctuation-related quantities. The analysis reveals that the asymmetry of the thermal walls causes asymmetry in the flow and thermal fields. In addition, the transfer of the heat generated by the pressure dilatation and the viscous stress is facilitated by the turbulent heat flux term and the mean molecular heat flux term.

What problem does this paper attempt to address?

### What problems does this paper attempt to solve? This paper aims to study the flow and heat transfer characteristics in supersonic turbulent channel flows with asymmetric thermal walls. Specifically, the objectives of this study are: 1. **Compare the differences between adiabatic and pseudo - adiabatic conditions**: Through Direct Numerical Simulation (DNS), compare the differences in turbulent statistics and structures between the adiabatic wall condition and the pseudo - adiabatic wall condition. The pseudo - adiabatic condition means that the upper wall temperature is set to the average temperature of the adiabatic wall. 2. **Explore the influence of different temperature differences on flow and heat transfer**: Study the asymmetry of the flow and thermal fields and its influence on heat transfer behavior when there are different temperature differences between two isothermal walls. Specifically, it includes four different upper - wall thermal boundary conditions: - Adiabatic case \( T_{\text{Ad}} \): The upper wall is adiabatic. - Pseudo - adiabatic case \( T_{32} \): The upper - wall temperature \( T_{w,t}=3.234 T_A \), where \( T_A \) is the average temperature of the adiabatic wall. - Sub - adiabatic case \( T_{25} \): The upper - wall temperature \( T_{w,t} = 0.77 T_A \). - Super - adiabatic case \( T_{40} \): The upper - wall temperature \( T_{w,t}=1.24 T_A \). 3. **Verify the contradictions in previous research results**: Through reliable DNS data, clarify the conclusion conflicts between Tamano & Morinishi (2006) and subsequent studies (such as Shadloo et al. (2015) and Zhang et al. (2022)), especially regarding the similarities and differences in basic turbulent statistics between the adiabatic - isothermal (I - A) case and the pseudo - adiabatic - isothermal (I - PA) case. ### Specific research methods - **Computational domain and grid settings**: Use a larger computational domain and a finer grid for DNS simulation to ensure the accuracy of the results. - **Control parameters**: Fix the Mach number \( Ma = 1.5 \), the Reynolds number \( Re = 6000 \), the Prandtl number \( Pr = 0.72 \) and the specific heat ratio \( \gamma=1.4 \). - **Boundary conditions**: The bottom wall maintains a constant temperature \( T_L \), while the upper wall is set according to different thermal boundary conditions. ### Main findings - **Comparison between adiabatic and pseudo - adiabatic conditions**: The results show that the basic turbulent statistics in the two cases are very similar in the region far from the wall, but there are obvious differences in the region near the upper wall, especially in the quantities related to temperature fluctuations. - **Influence of different temperature differences**: The wall temperature difference leads to the asymmetry of the flow and thermal fields, affecting the energy transfer and heat flux characteristics in the near - wall region. - **Energy exchange and heat transfer characteristics**: The analysis shows that the heat generated by pressure expansion and viscous stress is transferred through the turbulent heat flux term and the average molecular heat flux term. In conclusion, this study, through detailed numerical simulation and comparative analysis, reveals the complex flow and heat transfer characteristics of supersonic turbulent channel flows under asymmetric thermal wall conditions, providing an important reference for further understanding of compressible turbulence.

Direct numerical simulations of compressible turbulent channel flows with asymmetric thermal walls

Equivalence of Three Thermal Boundary Conditions in Compressible Turbulent Channel Flows

Contribution of Viscous Stress Work to Wall Heat Flux in Compressible Turbulent Channel Flows.

Numerical Analysis of Mixed Convective Heat Transfer In a Square Channel with Uniform Wall Temperature.

Three-Dimensional Numerical Analysis of Mixed Convective Heat Transfer in a Horizontal Square Channel with Heated and Cooled Side Walls.

Direct Numerical Simulation of Coherent Structure in Turbulent Open-Channel Flows with Heat Transfer

Direct Numerical Simulation of MHD Flow with Electrically Conducting Wall

A Unified Temperature Transformation for High-Mach-number Flows above Adiabatic and Isothermal Walls

Numerical Study of Compressible Wall-Bounded Turbulence – the Effect of Thermal Wall Conditions on the Turbulent Prandtl Number in the Low-Supersonic Regime

Experimental and Numerical Flow Visualizations of Mixed Convection with Flow Reversal in a Horizontal Channel with Constant Wall Temperature

Direct Numerical Simulation for Laminarization of Turbulent Forced Gas Flows in Circular Tubes with Strong Heating

Mach number and wall thermal boundary condition effects on near-wall compressible turbulence

Non-dissipative large-eddy simulation of wall-bounded transcritical turbulent flows

Direct numerical simulation of Taylor-Couette flow with vertical asymmetric rough walls

Compressibility Effects on Hypersonic Turbulent Channel Flow with Cold Walls

Using Direct Simulation Monte Carlo with Improved Boundary Conditions for Heat and Mass Transfer in Microchannels

Direct numerical simulation of Taylor–Couette flow with vertical asymmetric rough walls

Dissimilarity between turbulent heat and momentum transfer induced by a streamwise travelling wave of wall blowing and suction

Direct Numerical Simulation of Turbulent Heat Transfer in A Wall-Normal Rotating Channel Flow

Direct Numerical Simulation of Compressible Turbulent Channel Flows over Porous Boundaries

Direct Numerical Simulation of Turbulent Boundary Layer with Heat Transfer