Abstract:The physical mechanisms for the size effects on the flow and heat transfer have been divided into two classifications: (a) variations of the predominant factors influence the relative importance of various phenomena in the flow and heat transfer as the characteristic length decrease, even if the continuum assumption is still valid; (b) the continuum assumption breaks down as the characteristic length of the flow becomes comparable to the mean free path of the molecules. The departure of most flow and thermal phenomena in the MEMS from conventional ones is due to the variation of predominant factors in the flow and heat transfer problems, rather than that Navier-Stokes equation and Fourier heat conduction equation etc are no longer valid. Due to the larger surface to volume ratio for microchannels and microdevices, factors related to surface effects have more impact to microscale flow and heat transfer. For example, surface friction induced flow compressibility makes the fluid velocity profiles flatter and leads to higher friction factors and Nusselt numbers; surface roughness is likely responsible for the increased friction factor; the early transition from laminar to turbulent flow and Nusselt number; and other effects, such as the axial heat conduction in the channel wall, the channel surface geometry, surface electrostatic charges, and measurement errors, could lead to different flow and heat transfer behaviors from that at conventional scales. The condensation/evaporation across the liquid-vapor interface and the liquid-vapor nucleation are processes at nanometer scale. In these cases the macroscopic approach is hard to reveal the details at nanometer scales, while the molecular dynamic simulation is a powerful tool to describe such microscopic processes, and has been applied to investigate the density and temperature profiles across the liquid-vapor interface. The condensation coefficient on the liquid-vapor interface under thermodynamic equilibrium condition has been well predicted based on. the characteristic time method, which can distinguish the condensed particles from the reflected particles. Molecular dynamics simulations show that liquid-vapor nucleation undergoes three stages, namely, cavity growth, cavity coalescence and bubble formation.

Thermal Effects On Fluid Flow In Mini/Micro Channel

SOME FLOW AND THERMAL PHENOMENA AT MICROSCALE

An Overview of Liquid–vapor Phase Change, Flow and Heat Transfer in Mini- and Micro-Channels

Size effect on single-phase channel flow and heat transfer at microscale

The Scaling Effect on the Thermal Processes at Mini/Microscale

SOME FLOW AND THERMAL PHENOMENA AT MICRO/NANO SCALE

Some effects of interface on fluid flow and heat transfer on micro- and nanoscale

Fundamental Effects in Nanoscale Thermocapillary Flow

Size effect on microscale single-phase flow and heat transfer

Micro/Nanoscale Heat Transfer: Interfacial Effects Dominate The Heat Transfer

Effect of viscous heating on heat transfer performance in microchannel slip flow region

Using Direct Simulation Monte Carlo with Improved Boundary Conditions for Heat and Mass Transfer in Microchannels

Influence of Thermophysical Properties on the Flow and Heat Transfer in Rectangular Microchannels

Phase-Change Heat Transfer in Microsystems

Heat Transfer for Laminar Slip Flow in a Microchannel of Arbitrary Cross Section with Complex Thermal Boundary Conditions

Thermal transport in microchannels partially filled with micro-porous media involving flow inertia, flow/thermal slips, thermal non-equilibrium and thermal asymmetry

Fluid Flow And Heat Transfer Characteristics In Rectangular Microchannels

Thermal Mixing of Two Miscible Fluids in a T-shaped Microchannel

Thermal Relaxation and Critical Instability of Near-Critical Fluid Microchannel Flow.

Complex Flow And Heat Transfer Behavior Of Micro/Nano Fluidics: Benard Convection Always Occurs In A Nems World

Molecular dynamics study of spontaneous capillary flow and heat transfer in nanochannels