Nanoparticles Addition in AA2024 Aluminum/Pure Copper Plate: FSSW Approach, Microstructure Evolution, Texture Study, and Mechanical Properties

Behrouz Bagheri,Mehdi Alizadeh,Seyyed Ehsan Mirsalehi,Ali Shamsipur,Amin Abdollahzadeh

DOI: https://doi.org/10.1007/s11837-022-05481-z

2022-09-16

JOM

Abstract:Due to the high application of dissimilar Al-Cu joints in different industries, pure copper and the AA2024 alloy with SiC nanoparticles were successfully welded by friction stir spot welding (FSSW). The comparison of microstructure evolution and mechanical properties of the aluminum and copper in the weld zone of the joint has been analyzed by light microscopy, electron backscattered diffraction (EBSD), and scanning electron microscopy. According to the results, both continuous and discontinuous dynamic recrystallizations occurred during conventional FSSW. On the other hand, during the FSSW with SiC nanoparticles, continuous dynamic recrystallization was the prominent mechanism in the microstructure evolution of the stir zone. The grain size decreased as SiC nanoparticles were used during the conventional FSSW process because of the pinning effects. Mechanical properties of the weld zone, such as tensile load and hardness, increased during the FSSW with SiC nanoparticles, due to the higher amounts of the strengthening mechanisms of grain boundaries and dislocations along with the formation of hard and brittle intermetallic compounds (IMCs). Fracture surface analysis showed ductile fractures for joint samples with SiC nanoparticles.

materials science, multidisciplinary,metallurgy & metallurgical engineering,mining & mineral processing,mineralogy