Thermodynamic Basis of Isothermal Carbothermic Reduction of Oxide in Liquid Steel for Simultaneous Analysis of Soluble/Insoluble Oxygen Contents in the Steel Specimens

Youn-Bae Kang,Yong-Min Cho,Hae-Mi Hong
DOI: https://doi.org/10.1007/s11663-022-02520-7
2022-07-14
Metallurgical Transactions B (Process Metallurgy)
Abstract:Oxygen in liquid steel exists as soluble O (chemically dissolved in the steel matrix) and insoluble O (physically dispersed as the oxide inclusion). To measure the soluble O content ([S.O]) and the insoluble O content ([I.O]), both in the context of gas fusion analysis technique such as inert gas fusion infrared absorption method, it is necessary to melt the specimen under a C saturation condition in a "two-stage" isothermal heating mode. The first stage is carried out at a low temperature ( T L ), where only soluble O is extracted as CO(g). The second stage is subsequently carried out at a high temperature ( T H ), where the oxide inclusion is reduced by a carbothermic reaction. Therefore, it is necessary to identify the carbothermic reduction temperature of the oxide inclusion in the liquid steel at the C saturation ( ). A series of CALPHAD-type thermodynamic calculations were carried out to estimate the temperature of each oxide inclusion (Al 2 O 3 , Fe t O, SiO 2 , CaO, and MgO). It was found that the temperature depends on the metal content ([pct M]) and total pressure ( P ) inside the gas fusion chamber: increasing [pct M] or P increases . The proposed method may be applied for the steel systems containing those inclusions except for Fe t O. In the case of Al 2 O 3 inclusion containing steel ([pct Al] = 0.04), for example, , lies in the range of 1791 K (1518 °C) to 1838 K (1565 °C) depending on P inside the gas fusion chamber. Possible range of the is reported.
What problem does this paper attempt to address?