Abstract:In this present work, Ni3Si–Al2O3 nanocomposite powders were synthesized by mechanical milling using NiO, Si and Al as raw materials. The phase transformation, formation mechanism and microstructure evolution of the powders during mechanical milling were investigated by X-ray diffraction (XRD), differential thermal analysis (DTA), scanning electron microscopy (SEM), transition electron microscopy (TEM) and microhardness measurements. Results showed that the Ni3Si, Al2O3 and Ni31Si12 phases formed after 5 h of milling with a rapid mechanically induced self-propagating synthesis mode. The average grain size and internal strain of Ni3Si and Al2O3 after 30 h of milling were (16.8 nm, 1.27%) and (19.6 nm, 0.94%), respectively. The maximum microhardness value of 813 HV was obtained in the 30 h milled powder. The relationship between the hardness and grain size of the powders satisfies the Hall–Petch relationship. Ni3Si–Al2O3 nanocomposite powders are very stable during heating at 950 °C. By annealing of the milled powders leads to grain growth, internal strain and microhardness of Ni3Si powder decrease and transformation of disordered structure to an ordered state. A long-range ordering parameter (LRO) of 0.97 for the ordered Ni3Si can be achieved after annealing at 950 °C for 2 h.

Structure, Surface Nature, Thermal Stability, and Biomass Gasification Process of NiO/SiO2 and NiO-Pr2O3/SiO2 Nanocomposites Obtained through Facile Deposition Precipitation Method

PREPARATION OF NiO NANOPARTICLES ON THE SILICA SURFACE BY ADSORPTION PHASE SYNTHESIS AND ITS REGULATION ON MORPHOLOGY OF NiO PARTICLES

Study of Annealing Effect Upon the Structural and Solar- Selective Properties of C/Ni/NiO Composite Coatings Prepared by Sol–gel Method

Synthesis, characterization and dielectric properties evaluation of NiO-Co3O4 nanocomposite

Synthesis, Characterization, Optical and Dielectric Properties of NiO and Zn‐Doped NiO Nanostructures: Toward Advanced Applications

Preparation of NiAl2O4/Al2O3 composite nanopowder

Preparation and properties of Al2O3/Ni composite from NiAl2O4 spinel by in situ reaction sintering method

Processing study of gel-cast tubular porous NiO/SDC composite materials from gel-combustion synthesized nanopowder

Preparation of One-Dimensional Ni0.5 Zn0.5 Fe2O4/SiO2 Composite Nanostructures and Their Magnetic Properties

Fabrication of NiO/ZrO2 nanocomposites using ball milling-pyrolysis method

Characterization and Formation Mechanism of Ni3Si–Al2O3 Nanocomposite Prepared by Mechanochemical Reduction Method

Synthesis and characterization of TiO2–NiO and TiO2–WO3 nanocomposites

Preparation and characterization of nanocrystalline NiO in mixed solvent

Biosynthesis Effect of Egg White on Formation and Characteristics of NiO/NiCo2O4 Nanocomposites

Conversion of Conventional NiO Powders into Nanostructures by a Simple Chemical Method

Synthesis of ((CeO2)0.8(Sm2O3)0.2)@NiO Core-Shell Type Nanostructures and Microextrusion Printing of a Composite Anode Based on Them

Synthesis and electrochemical properties of nickel oxide/carbon nanofiber composites

The Effect of Composition on the Properties and Application of CuO-NiO Nanocomposites Synthesized Using a Saponin-Green/Microwave-Assisted Hydrothermal Method

A simple fabrication of mineral supported Ni-NiAl2O4 nanocomposites with a novel transition layer

Synthesis and Characterization of Core-Shell NiO@Al2O3 with High Ni/Al Ratio and High Calcination Temperature

Insights into the interface of NiCo2O4 spinel /LaCoO3 perovskite nano-composite for CO and soot oxidation