Abstract:Purpose : Establish a technique for simultaneous interrupted volumetric imaging of internal structure and time-resolved full-field surface strain measurements during in-situ X-ray micro-computed tomography (XCT) experiments. This enables in-situ testing of stiff materials with large forces relative to the compliance of the in-situ load frame, which might exhibit localization (e.g., necking, compaction banding) and other inhomogeneous behaviors. Methods : The system utilizes a combination of in-situ XCT, 2D X-ray imaging, and particle tracking to conduct volumetric imaging of the internal structure of a specimen with interrupted loading and surface strain mapping during loading. Critically, prior to the laboratory-scale XCT experiments, specimens are speckled with a high-X-ray-contrast powder that is bonded the surface. During in-situ loading, the XCT system is programmed to capture sequential 2D X-ray images orthogonal to the speckled specimen surface. A single particle tracking (SPT) or digital image correlation (DIC) algorithm is used to measure full-field surface strain evolution throughout the time-sequence of images. At specified crosshead displacements, the motion and 2D image sequence is paused for volumetric XCT image collection. Results : We show example results on a micro-tensile demonstration specimen additive manufactured from Inconel 718 nickel-chrome alloy. Results include XCT volume reconstructions, crosshead-based engineering stress, and full-field strain maps. Conclusion : We demonstrate an in-situ technique to obtain surface strain evolution during laboratory-scale XCT testing and interrupted volumetric imaging. This allows closer investigation of, for example, the effect of micro-pores on the strain localization behavior of additive manufactured metal alloys. In addition to describing the method using a representative test piece, the dataset and code are published as open-source resources for the community.

High-Speed, 3D Volumetric Displacement and Strain Mapping in Soft Materials Using Light Field Microscopy

Volumetric Three-Component Velocimetry: a New Tool for 3D Flow Measurement

Dynamic Subsurface Deformation and Strain of Soft Hydrogel Interfaces Using an Embedded Speckle Pattern With 2D Digital Image Correlation

Surface Patterning for Multi-Scale Strain Analysis of In-Situ Sem Mechanical Experiments

Metrological assessment of multi‐sensor camera technology for spatially‐resolved ultra‐high‐speed imaging of transient high strain‐rate deformation processes

Three-Dimensional Optical Imaging of Internal Deformations in Polymeric Microscale Mechanical Metamaterials

Non-destructive mapping of stress, strain and stiffness of thin elastically deformed materials

High-speed two-color scanning volumetric laser-induced fluorescence

Fourier synthesis optical diffraction tomography for kilohertz rate volumetric imaging

High resolution strain measurements in highly disordered materials

Ultrafast Visualization of Incipient Plasticity in Dynamically Compressed Matter

A Technique for In-Situ Displacement and Strain Measurement with Laboratory-Scale X-Ray Computed Tomography

Theoretical Analysis of Novel Quasi-3D Microscopy of Cell Deformation

Space-resolved diffusing wave spectroscopy measurements of the macroscopic deformation and the microscopic dynamics in tensile strain tests

Research and Development of Light Field Microscope for Measuring 3D Microstructures

Deformation Microscopy for Dynamic Intracellular and Intranuclear Mapping of Mechanics with High Spatiotemporal Resolution

Computational Optical Sectioning with an Incoherent Multiscale Scattering Model for Light-Field Microscopy.

Simultaneous Multiscale Measurements on Dynamic Deformation of a Magnesium Alloy with Synchrotron X-Ray Imaging and Diffraction

A three-dimensional strain measurement method in elastic transparent materials using tomographic particle image velocimetry

3D surface morphology imaging of opaque microstructures via light-field microscopy

3D Strain Measurement of Heterostructures Using the Scanning Transmission Electron Microscopy Moire Depth Sectioning Method