Abstract:Large aluminum alloy ring forgings are the core components of heavy-duty rocket fuel storage tanks, and the large residual stress inside the rings leads to poor shape accuracy of large thin-walled parts. The initial stress of the 2219 aluminum alloy ring blank was tested using the drilling method, and the creep constitutive coefficient of the 2219 aluminum alloy was determined through stress relaxation tests. The numerical simulation processes of thermal stress relief (TSR), vibration stress relief (VSR), and thermal–vibration stress relief (TVSR) were compared and established. Through the correlation analysis between the actual measurement results of residual stress and the simulation results, it can be seen that the strong correlation in three directions at each measurement point accounts for over 37.5%, and the moderate correlation accounts for over 62.5%. This indicates that the numerical simulation model of 2219 aluminum alloy ring containing initial residual stress can accurately reflect the size and distribution of residual stress inside the actual ring. The simulation results show that the derived constitutive model can describe the stress relaxation process of TVSR by combining a single thermal time effect stress relaxation constitutive theory with a VSR plastic deformation material model. The simulation models established above were used to calculate the residual stress homogenization ability of three types of aging. The results showed that VSR, TSR, and TVSR can homogenize and reduce the residual stress field inside the ring, improve the distribution of residual stress inside the ring, and have a better overall homogenization ability of TVSR. The VSR control has a certain effect on reducing and homogenizing residual stress, but compared with TSR and TVSR, the reduction and homogenization ability of residual stress control is limited. The homogenization control effect TVSR > TSR > VSR, and the maximum equivalent stress homogenization rates of VSR, TSR, and TVSR are 52.8%, 80.6%, and 82.2%, respectively. Then, numerical simulation technology was used to study how the initial residual stress in the blank causes the deformation of the ring during the thin-walled machining process. The roundness error theory of the minimum containment area method was applied to evaluate the deformation degree during the thin-walled numerical machining process, and the TVSR method was used for stress regulation. The deformation law of the thin-walled machining of the ring under different aging parameters was studied.

Finite Element Simulation Analysis on Residual Stress Relief of 7075 Aluminum Alloy Ring

Research On High-Frequency Vibratory Stress Relief For Small Assembly

Numerical Simulation and Experiment of Stress Relief and Processing Deformation of 2219 Aluminum Alloy Ring

Finite Element Method Simulation for Residual Stress in Quenched Aluminum Alloy Thick-Plate and Its Effect on Machining Distortion

Evaluation of residual stress relief of aluminum alloy 7050 by using crack compliance method

Research on process optimization and rapid prediction method of thermal vibration stress relief for 2219 aluminum alloy rings

Effects of TVSR process on the dimensional stability and residual stress of 7075 aluminum alloy parts

Numerical simulation of stress evolutions in 2A14 aluminum alloy components during solution and aging process

Evaluation of Residual Stress Depth Profiling in 7075 Aluminum Alloy Plates

Investigating the Effects and Mechanisms of Thermal–Vibration-Coupled Stress Relief Treatment on Residual Stress in SiC/Al Composites

Research on machining deformation of aluminum alloy rolled ring induced by residual stress

Residual stress effects on fatigue crack growth in different regions of aluminum alloy 7050 friction stir weld

Study on Residual Stress Produced in Milling of Aeronautic Structure

Relief of Residual Stresses in 7050 Aluminum Alloy by Deep Cryogenic Treatment

Numerical Simulation of Quenching and Pre-Stretching Residual Stress in 7085 Aluminum Alloy Plate

Simulation Research on Temperature Filed and Thermal Stress Field of 7050 Aluminum Alloy Part in Quenching Process

Residual stresses evolution and process route optimization of TC4 profiled rolled rings incorporating thermal bulging

Ring-core integral method to measurement residual stress distribution of Al-7075 alloy processed by cyclic close die forging

Research on Residual Stresses and Microstructures of Selective Laser Melted Ti6Al4V Treated by Thermal Vibration Stress Relief

Numerical Simulation of Quenching-Stretching Process of Aluminum Alloy Plate and Analysis of Mechanism of Reducing Residual Stresses

A New Method to Characterize and Model Stress-Relaxation Aging Behavior of Aluminum Alloys Under Age Forming Conditions