Abstract:A generalized and efficient model for rotating anisotropic rotor-bearing systems is presented in this paper with full considerations of the system’s anisotropy in stiffness, inertia and damping. Based on the 3D finite element model and the model order reduction method, the effects of anisotropy in shaft and bearings on the forced response and whirling of anisotropic rotor-bearing systems are systematically investigated. First, the coefficients of journal bearings are transformed from the fixed frame to the rotating one. Due to the anisotropy in shaft and bearings, the motion is governed by differential equations with periodically time-variant coefficients. Then, a free-interface complex component mode synthesis (CMS) method is employed to generate efficient reduced-order models (ROM) for the periodically time-variant systems. In order to solve the obtained equations, a variant of Hill’s method for systems with multiple harmonic excitations is developed. Four dimensionless parameters are defined to quantify the types and levels of anisotropy of bearings. Finally, the effects of the four types of anisotropy on the forced response and whirl orbits are studied. Numerical results show that the anisotropy of bearings in stiffness splits the sole resonant peak into two isolated ones, but the anisotropy of bearings in damping coefficients mainly affect the response amplitudes. Moreover, the whirl orbits become much more complex when the shaft and bearings are both anisotropic. In addition, the cross-coupling stiffness coefficients of bearings significantly affect the dynamic behaviors of the systems and cannot be neglected, though they are often much smaller than the principle stiffness terms.

Whirl dynamics of an axially functionally graded liquid-filled rotor considering shear deformation and rotary inertia

Effect of fluid viscosity on stability of a flexible rotor partially filled with fluid

DYNAMIC BEHAVIOUR OF A ROTOR PARTIALLY FILLED WITH FLUID IN THE UNSTABLE REGION

Experimental Investigation into the Effect of Fluid Viscosity on Instability of an Over-Hung Flexible Rotor Partially Filled with Fluid

Stability Analysis of Symmetrical Rotors Partially Filled with a Viscous Incompressible Fluid

Effect of Axially Functionally Graded Material on Whirling Frequencies and Critical Speeds of a Spinning Timoshenko Beam

Stability of a Rotor System on Support of Anisotropical Rigidity and Partially Filled with an Inviscid Fluid

Instability of an Over-Hung Rigid Centrifuge Rotor Partially Filled with Fluid

Experimental Study on Vibration and Stability of an Over-Hung Flexible Rotor Partially Filled with Two Kinds of Fluids

Three-Dimensional Vibrational Characteristics of Functionally Graded Rotating Microbeams Based on the Higher-Order Refined Shear Deformation Theory

Stability Behaviour Of An Isotropic Rotor System Anisotropically Mounted And Partially Filled With Inviscous Fluid

Dynamics of Axially Functionally Graded Conical Pipes Conveying Fluid

Research On Circumferential Fluid Pressure Distribution And Whirl Stability Of Rotor-Bearing System

A 3d Finite Element-Based Model Order Reduction Method for Parametric Resonance and Whirling Analysis of Anisotropic Rotor-Bearing Systems

Vibration Attenuation Mechanism of the Rotor System with Anisotropic Support Stiffness

Nonlinear Dynamic Analysis of a Rigid Rotor Supported By a Spiral-Grooved Opposed-Hemisphere Gas Bearing

Dynamical stability of embedded spinning axially graded micro and nanotubes conveying fluid

Thermomechanical Vibration Analysis of a Functionally Graded Shell with Flowing Fluid

STUDY ON DYNAMIC CHARACTERISTICS OF WHIRLING ROTOR IMMERSED IN CONCENTRIC ANNULAR FLOW

Vibration, buckling and stability analysis of spinning bi-directional functionally graded conical shells

Free vibration analysis of a spinning functionally graded spherical–cylindrical–conical shell with general boundary conditions in a thermal environment