Abstract:Parametric resonance can amplify vibrations to levels far beyond what the rotor system would experience under normal operating conditions. This results in excessive wear and tear, reduced operational lifespan, increased maintenance requirements, and even catastrophic failures. Therefore, it is urgently needed to figure out the instability regions of parametrically excited rotors and develop effective methods to control or regulate them. In this paper, our focus is on a damped single-span rotor with periodic axial load, a representative example of a parametrically excited system. The method of multiple scales is applied to solve the governing equations, and then the analytical instability regions' boundaries and forced vibration responses are derived. Based on these analytical results, the instability region classification is carried out. The absence of certain instability regions is rigorously demonstrated. It is found that the primary difference type does not exist, no matter whether the rotor system has isotropic or orthotropic supporting structures. If the supporting structures are isotropic, the secondary difference type also does not exist. In this case as well, the primary and secondary sum types, which are exclusively associated with either forward or backward whirling frequencies, do not manifest. After the instability region classification, the feasibility analysis of introducing piezoelectric shunt damping to stabilize the rotor system is proceeded. In the numerical simulation, it is seen that as the electrical resonant frequency is tuned to a targeted critical speed, the starting points (critical dynamic load coefficients) of instability regions associated with that critical speed are raised with the increase of piezoelectric shunt damping. This means a higher threshold of triggering the uncontrolled parametric resonance.

Experimental Study on Vibration and Stability of an Over-Hung Flexible Rotor Partially Filled with Two Kinds of Fluids

Effect of fluid viscosity on stability of a flexible rotor partially filled with fluid

Experimental Investigation into the Effect of Fluid Viscosity on Instability of an Over-Hung Flexible Rotor Partially Filled with Fluid

DYNAMIC BEHAVIOUR OF A ROTOR PARTIALLY FILLED WITH FLUID IN THE UNSTABLE REGION

Instability of an Over-Hung Rigid Centrifuge Rotor Partially Filled with Fluid

Stability Analysis of Symmetrical Rotors Partially Filled with a Viscous Incompressible Fluid

Stability Behaviour Of An Isotropic Rotor System Anisotropically Mounted And Partially Filled With Inviscous Fluid

Stability of a Rotor System on Support of Anisotropical Rigidity and Partially Filled with an Inviscid Fluid

Modeling a Two-Span Rotor System Based on the Hamilton Principle and Rotor Dynamic Behavior Analysis

Vibration Analysis of a Nonlinear Rotor-Bearing-seal System

Dynamics of A Rotor Supported on Magnet-Rheological Fluid Squeeze Film Damper

An Experimental Study into Dynamic Behavior of a Magnetorheological Fluid Squeeze Film Damper – Overhung Flexible Rotor

Lubrication and stability analysis of nonlinear rotor-bearing system

Vibration Characteristics of Aeroengine's Rotor System During Maneuvering Flight

Experimental and Theoretical Investigation on Dynamic Behavior of a Flexible Rotor Supported on a Shear-Type Magnetorheologic Fluid Damper

Nonlinear Behavior and Stability Analysis of Dual-Disc Over-Hung Rub-Impact Rotor under Gyroscopic Action

Study on the Flow Stability and Dynamic Characteristics of a Water Bearing

Instability Region Classification and Control of Periodically Axially Loaded Rotor

Fluid–structure interaction of a flexible rotor in water

Whirl dynamics of an axially functionally graded liquid-filled rotor considering shear deformation and rotary inertia

Stability analysis of a rotor system with electromechanically coupled boundary conditions under periodic axial load